Phonak MyLink+ - Page 29

29
Most probable cause
Battery completely
exhausted
1. Hearing instrument
not in ‘T’ or ‘MT’
program.
2. MyLink+ and the
transmitter
are not on the same
frequency.
Remedy
1. Fully charge MyLink+
and the transmitter
(see page 15).
2. If the green light is
still not visible when
MyLink+ is switched
on, please contact
your hearing care
professional.
1. Make sure your hearing
instrument program is
‘T’ or ‘MT’.
2. Synchronize MyLink+
with the transmitter.
Check the user guide
of the transmitter.
If the speaker‘s voice is
still not audible, please
contact your hearing
care professional.