26
Step 5.3 Inserting an UltraPower or SuperPower model
with Power SlimTube with classic earmold
Follow the instructions in Step 5.2, as this procedure is
identical.
Step 5.4 Inserting a CRT model with a cShell
Before inserting the cShell, check that it is correctly
attached to the tube. With your right hand, place the
right hearing aid (red mark on the hearing aid, see
step 5.1) behind your right ear (Fig. 5g). Place the
hearing tube between your thumb and forenger. Insert
the cShell deep enough into the ear canal so that the
hearing tube lies at on your ear (Fig. 5h).
Fig. 5g Fig. 5h
4. Using the hearing aid
To Next Page
Loading...
Need help?
General
