Phonak Nathos S+ - Step 5.2 Inserting a SP W or UP W Model with Classic Earmold

22
Step 5.2 Inserting a SP W or UP W model with classic
earmold
Before inserting the earmold, check that the earmold
tube is slid over the hearing aid hook correctly. With
your right hand, take your earmold for the right ear
(red mark on the hearing aid, see step 5.1) between
your thumb and forenger (Fig. 5c).
Take the earmold up to your ear (Fig. 5c). Place the
ear canal part of the earmold into your ear canal
(see the part circled in green (Fig. 5c)). Next place
the hearing aid behind your ear (Fig. 5d). Then insert
the upper part of the earmold into the upper part of
the bowl of your ear (Fig. 5e).
Fig. 5c
Fig. 5eFig. 5d
4. Using the hearing aid