21
Fig. 5b Fig. 5c Fig. 5d
Step 5.2 Inserting a hearing aid with a dome
Before inserting the dome, check that it is correctly
attached to the external receiver (dome length is
completely slid over the external receiver sound outlet).
With your right hand, place the right hearing aid (red
mark on the hearing aid, see step5.1) behind your right
ear (Fig. 5b). Take the external receiver between your
thumb and forefinger. Insert the dome deep enough into
the ear canal so that the hearing tube lies flat on your
ear (Fig. 5c). If your hearing aid has a retention cord, then
press it into the bowl of the ear in order to retain the
dome in the ear canal (Fig. 5d).
To Next Page
Loading...
Need help?
General
