To Next PageTo Next Page
Need help?Do you have a question about the Phonex Broadband Easy Jack PX-441 and is the answer not in the manual?
General| Category | Telephone Accessories |
|---|---|
| Model | PX-441 |
| Brand | Phonex Broadband |
| Connector Type | RJ11 |
| Color | White |
| Compatibility | Standard Telephone Lines |
Provides essential safety guidelines for operating and maintaining the Easy Jack system, including water, electrical, and handling precautions.
Details critical operational aspects like surge protector use, power outage behavior, and reset procedures for optimal system function.
Outlines FCC compliance, interference guidelines, and requirements for radio frequency energy, including Part 15 Rules and ACTA.
Explains the Ringer Equivalence Number (REN) and its implication for the maximum number of devices connectable to a single telephone line.
Details Industry Canada terminal equipment technical specifications and registration, ensuring compliance with Canadian standards.
Instructions for carefully removing units from packaging and inspecting for damage before operation, advising prompt notification if damage is found.
Describes the Base Unit, Extension Unit, and the included Telephone Cord (6'), detailing their features and purpose.
Step-by-step guide to connect the Base Unit to the wall phone jack and electrical outlet, including phone connections.
Provides instructions for plugging the Extension Unit into an electrical outlet and verifying its connection and communication.
Details how to connect devices like satellite receivers, DVRs, or modems to the Extension Unit after the initial setup is complete.
Offers advice on installing units in different outlets to mitigate static interference that may affect computer modem performance.
Explains that units ship with a default link code and how to set a new code to ensure units operate within the same dwelling.
Step-by-step guide to set the link code by pressing a recessed button on the Base Unit, enabling it for Extension Unit programming.
Details programming the first and subsequent Extension Units by pressing a button on the Extension Unit and verifying dial tone.
Provides a table of common problems like 'No dial tone' or 'Static/Interference' with corresponding solutions and actions.
Clarifies that only the phone connected to the Base Unit will function during a power outage.
Explains that the EasyJack System supports only one phone line, limiting operation to the line connected to the Base Unit.
Advises against using the system with GFI circuitry as it may reduce signal strength and affect performance.
Details the one-year warranty against defects, exclusions for misuse, and limitations on liability for indirect or consequential damages.
Provides the helpline number for additional set-up assistance and contact details for Phonex Corporation.
