Phono Solar PS240 M- 20/U User Manual

PHONO SOLAR AC Module
Installation & User‟s Guide
Copyright© 2011 PHONO SOLAR. All rights reserved.
This Document may not be copied, photocopied, reproduced, translated or converted to any electronic or machine-readable form,
in whole or in part, without prior written approval of PHONO SOLAR.
Product Specifications and Descriptions Subject to Change for Performance Enhancement or Other Reasons.

Phono Solar PS240 M- 20/U Specifications

General

Brand	Phono Solar
Model	PS240 M- 20/U
Category	Solar panel
Language	English

Summary

IMPORTANT SAFETY INSTRUCTIONS

SAFETY SYMBOLS USED IN THIS MANUAL

Explains the meaning of symbols used in the manual for hazard identification.

CAUTIONS and WARNINGS

TECHNICAL SPECIFICATIONS

DESCRIPTION OF OPERATION

WARRANTY

INSTALLING THE PV RACKING SYSTEM

SELECTING A MOUNTING LOCATION

MOUNTING STRUCTURE AND HARDWARE

SELECTING THE PROPER MOUNTING STRUCTURE AND HARDWARE

Guidance on choosing appropriate mounting structures and hardware for module installation.

MOUNTING WITH BOLTS

INSTALLING THE AC MODULES ONTO THE RACKING SYSTEM

ORIENTATION AND CLEARANCES

WIRING YOUR AC MODULES

UTILITY CONNECTION SAFETY

Emphasizes that utility connection must be done by a licensed electrician.

CONDUCTOR AND CIRCUIT REQUIREMENTS

Details requirements for AC conductors, circuit breakers, and conduit fittings.

ELECTRICAL CONNECTION PRECAUTIONS

Warns about ensuring circuits are de-energized and using proper fasteners.

CABLING AND CIRCUIT LIMITS

CIRCUIT CONNECTION WARNINGS

Warns against connecting to certain load centers and exceeding module limits per circuit.

CABLING GUIDELINES

AC CONNECTOR & HOME RUN CABLE DESCRIPTION

HOME RUN WIRING PROCEDURE

ATTACHING THE AC CONNECTOR

CONNECTOR ASSEMBLY STEPS

AC CONNECTOR ASSEMBLY PART 2

CONNECTOR GASKET AND ORIENTATION

AC CONNECTOR ASSEMBLY PART 3

CONNECTOR ALIGNMENT AND SECURING

AC CONNECTOR ASSEMBLY PART 4

CONNECTOR SCREW TIGHTENING AND VERIFICATION

AC CONNECTOR ASSEMBLY PART 5

FINAL CONNECTOR CHECKS

GROUNDING THE PV RACK

GROUNDING SYSTEM INSTALLATION

Steps for installing a grounding electrode, conductor, and clamp to the PV rack for safety.

GROUNDING MULTIPLE RACKS

GROUNDING OF MULTIPLE AC RACKING SYTEMS

Instructions for grounding multiple PV racks and ensuring continuity.

ACTIVATING YOUR AC MODULE INVERTER SYSTEM

PRE-ACTIVATION WARNINGS AND NOTES

Important safety warnings and notes before activating the inverter system.

AC MODULE ACTIVATION PROCEDURE

Steps for activating the AC module inverter system and verifying operation via HelioSentry®.

SERVICE GUIDE

TROUBLESHOOTING AC MODULES

AC MODULE REPLACEMENT PROCEDURE