Photoflex MultiDisc Series - MultiDisc Skin and Product Information; Removing and Reversing Reflective Skin; Available MultiDisc Sizes and Accessories

To Previous Page

For detailed specifications, product tutorial videos and more, please visit www.photoflex.com

Removing the Reecve Skin

8. The MulDisc’s reecve skin can be removed by slowly

unzipping the self-repairing zipper. Figure 8

9. At the end of the zipper there is a hole in the skin where the

inner disc’s handle is passed through. Figure 9

10. The inner diusion disc can now be removed from the outer

reecve skin. Figure 10

11. The MulDisc’s reecve skin can be reversed to expose two

more reecve surfaces. Figure 11

12. Zip the skin on with reverse opons exposed and you are

ready to use! Figure 12

Note: For the MulDisc 9-n-1 there is an addional reecve cover provided,

simply remove one to use the other, following the previous steps.

Available Sizes

22 inch 5-in-1 Item #: 870220 (DL-22MULTI)

32 inch 5-in-1 Item #: 870229 (DL-32MULTI)

42 inch 5-in-1 Item #: 870241 (DL-42MULTI)

22 inch 9-in-1 Item #: 870223 (DL-22MULTI7N1)

32 inch 9-in-1 Item #: 870232 (DL-32MULTI7N1)

42 inch 9-in-1 Item #: 870244 (DL-42MULTI7N1)

Figure 12.

Figure 9.

Figure 8.

Figure 10.

Figure 11.

DL-B HOLDER

Extended length 69.5"/176.5cm

Collapsed length 39.5"/100.4cm

DL-BHOLDERCOMP

Extended length 50"/127cm

Collapsed length 28.5"/72.4cm

Available Accessories

• LiteDisc Holder Item #870256 (DL-BHOLDER)

• LiteDisc Holder Compact Item #870253 (DL-BHLDRCOMP)

Rev 09/2016

Customer Support (831) 786-1370

E-mail: sales@photoflex.com

Photoflex is a division of PromarkBRANDS, Bartlett, IL USA.

, Photoflex

and the Photoflex logo are

trademarks or registered trademarks of Photoflex and/or its affiliates in the U.S.

and other countries.

PHOTOFLEX

WARRANTY

• Warranties only cover manufacturer’s defects and workmanship.

• We reserve the right to inspect all merchandise returned (end

users and dealers) for warranty fulfillment.

• All returns must be pre-approved with Return Manufacturers

Authorization obtained from Photoflex/PromarkBRANDS.

• A receipt showing date of purchase will be required for all returns.

• Freight must be paid by the customer or dealer.

• Warranties are valid only from date of Original Purchase.

up to 69.5"39.5"

up to 50"28.5"