For detailed specifications, product tutorial videos and more, please visit www.photoflex.com
MulDisc
®
Family Instrucons | MulDisc 5-in-1 and MulDisc 9-in-1
MulDisc
Before assembling your MulDisc, make sure all components are present.
You will need:
• Translucent inner disc
• Zippered skin with four reecve surfaces
• For 9- in -1 only: Second zippered skin.
Opening and Re-Collapsing the MulDisc
1. Remove the disc with zippered skin aached from the protecve
carry bag. Figure 1
2. The disc is twisted and collapsed to t into the carry bag. Slowly
and carefully unfold it unl it is completely open. Figure 2
3. To collapse the disc for storage place one hand up and one hand
down on opposing edges of the disc. Figure 3
4. Twist one hand toward the other. Figure 4
5. Connue twisng, folding one side over the other. Figure 5
6. The MulDisc will now resemble three hoops. Figure 6
7. The collapsed MulDisc can now be sized to properly t back
into the bag. Figure 7
Figure 2Figure 1
Figure 3
Figure 6
Figure 4
Figure 5
Figure 7
Silver - mae
Silver - Shiny
SoGold Black Gold White - cool
White - warm
Translucent SunLiteSilver SoGold Gold WhiteTranslucent
MulDisc 5-in-1 Colors MulDisc 9-in-1 Colors
To Next Page
Need help?
General
