Soul Calibur V Stick Install:
The Soul Calibur V stick can be installed to in the identical way as the normal install. There is only
one slight difference, and that’s because of the adjusted placement of the joystick on this model.
Step 1. Before closing your stick up for good/testing, you MUST remove the bottom right corner
screw of the JLF mounting plate. If you don’t it hits the cabling and makes it hard to close the stick
back up.
Photos courtesy of TRiXWoN
The screw you should remove to make the install fit nicely.
A picture of why you should do this. The screw hits the JLF wiring harness if you do not.
To Next Page
Loading...