kV
The unit complies
with the applicable
EC regulations.
1 SAFETY INSTRUCTIONS
2 OPERATING INSTRUCTIONS
3 INSTRUCTIONS OF THE GERMAN X-RAY
ORDINANCE
4 PURPOSE AND CHARACTERISTICS
5 FUNCTIONAL AND OPERATING ELEMENTS
6 OPERATION
7 CHECKLIST
8 TECHNICAL DATA
9 SCOPE OF SUPPLY
10 ACCESSORIES
11 WARRANTY
12 DISPOSAL
13 APPENDIX
1 SAFETY INSTRUCTIONS
Read the operating instructions thoroughly and com-
pletely prior to starting the unit. This is important for your
own protection and for avoiding damage to the unit.
Use the unit solely for its intended purpose.
The unit is intended for use in dry and dust-free rooms
where there is no risk of explosion.
Prior to connecting the unit to the mains power supply,
ensure that the protective conductor of the power supply
unit is correctly connected to the protective conductor of
the mains power supply network. The mains power plug
may only be plugged into a mains power socket that is
equipped with a protective conductor. Do not eliminate
this protective effect by using an extension lead without a
protective conductor.
Ensure that the mains voltage that is stated on the type
plate of the unit matches the mains voltage of your power
supply network.
When setting the unit up, ensure that the mains power
switch and the device plug are freely accessible. Ensure
also that the venting slots of the unit are not covered or
blocked.
Do not connect any devices to the unit other than the
ones that are intended for this purpose.
Attention: Disconnect the unit from the power supply
prior to loosening, replacing, or removing any of the ca-
ble connections!
Ensure that no liquids or objects penetrate the unit
through the venting slots.
To Next Page
Need help?
General