4
In the box...
1x PiJuice Board with battery, 1x PiJuice Guide (you’re reading it!)
4x Mounting posts attached to PiJuice, 8x mounting screws (4 are
already assembled to the board).
1
Prepare your Raspberry Pi and SD Card
Visit pisupp.ly/pijuice to download the PiJuice software.
2
Switch on the PiJuice...
Then start making with Raspberry Pi!
4
Visit the Pi Supply Maker Zone at
pisupp.ly/make to nd out more!
5
With your Raspberry Pi turned off...
Attach the PiJuice to the board and screw it into place.
3
START GUIDE
To Next Page