The system turns off completely (change from SET to the OFF state), then the stored
speed is lost and the instrument cluster light goes off, if any of the following conditions
are present:
•
The cruise control selector is pressed centrally for long (more than 1 second);
•
Run-off interrupter activated;
•
Engine stop (Key-OFF);
•
Failure, malfunction of a component involved in controlling the speed (tone
wheels sensors, control units, etc.)
CAUTION
WHEN ENTERING THE ADJUSTMENT MODE OF THE CRUISE CONTROL, THE
QUICK SHIFT SYSTEM IS DISABLED.
02_69
AWC SELECTOR (Aprilia Wheelie Control)
(when enabled from the menu)
Once the AWC function has been activated by the menu settings and therefore can
be interacted with, using the selector switch it is possible to change the intervention
value with a short shift up or down.
The AWC function can be disabled from level 1 with a short shift downwards of the
MODE selector.
Button V4-MP (V4 Multimedia Platform) (02_70, 02_71)
(ONLY IF THERE IS THE V4-MP CONTROL UNIT)
62
To Next Page
Loading...
Need help?
General
