PianoDisc PDS-228CFX - User Manual

Questions and Answers

M
Margaret PetersAug 15, 2025
Why is my PianoDisc PDS-228CFX Recording Equipment not turning on?
- W
  wigginsronnieAug 15, 2025
  If your PianoDisc Recording Equipment isn't turning on, there are a couple of things to check: * Make sure the main power switch located under the piano is turned on. * Verify that the unit is properly plugged in by checking all power cord connections.
E
Erica ShermanAug 18, 2025
What to do if the PianoDisc PDS-228CFX piano part is too loud or soft?
- J
  Jason MartinezAug 18, 2025
  If the piano part is too loud or too soft compared to the symphony background, you need to adjust the BALANCE settings on your PianoDisc Recording Equipment.
C
Carolyn ThompsonAug 21, 2025
What to do if my PianoDisc PDS-228CFX Recording Equipment songs appear out of order?
- Z
  Zachary HayesAug 21, 2025
  If songs appear “out of order” when using [SCAN] buttons, PRODUCER mode is active and is controlling the song order. Turn PRODUCER Off by pressing the [P] button.
F
felicia13Aug 25, 2025
How to fix PianoDisc PDS-228CFX Recording Equipment when the piano does not play?
- J
  Jonathan PriceAug 25, 2025
  If the piano does not play, even though the front display indicates playback, consider these possible causes: 1. The MIDI cables are not connected properly. Solution: Make sure a cable connects TO PIANO on the control unit to CONTROL UNIT on the CPU interface. 2. The MUTE function has been turned on (indicated on display). Solution: Turn off the muting OR engage the DEFAULT settings. 3. PIANO OUT has been switched off. Solution: Make sure PIANO OUT is on. 4. The piano part may be disabled. Solution: Press default on Page 2.
A
Amanda LeonAug 28, 2025
What to do if not all songs are playing on PianoDisc PDS-228CFX?
- M
  mathew97Aug 28, 2025
  If not all of the songs on the disk are being played, there are a couple of reasons: * The songs are being played according to the diskette’s producer track. To solve this, press PRODUCER, and then press [CANCEL] to play the disk normally. * SHUFFLE mode had been selected. To solve this, turn the SHUFFLE mode off.
A
angelaorrAug 31, 2025
Why is there no volume change on my PianoDisc PDS-228CFX Recording Equipment?
- M
  Madison Jones DVMAug 31, 2025
  If there is no change in loudness (symphony or piano) when VOLUME is adjusted, the BALANCE setting is too far toward symphony (S) or piano (P). To fix it, bring the BALANCE back toward 50%.
B
Blake PalmerSep 4, 2025
How to correct out of sync sound on PianoDisc PDS-228CFX?
- M
  Megan FletcherSep 4, 2025
  If the piano and symphony parts sound out of sync, the parts need to be aligned. Adjust SYNC until the parts line up. Generally the lower the VOLUME is set, the higher the SYNC should be set.
P
Phillip SolisSep 7, 2025
How to fix wrong key or tempo on PianoDisc PDS-228CFX Recording Equipment?
- I
  irobinsonSep 7, 2025
  If a song is in the wrong key or the tempo is incorrect on your PianoDisc Recording Equipment, the TRANSPOSE or TEMPO settings have been altered. Set TRANSPOSE to zero and TEMPO to the default value.
J
Jennifer BlankenshipSep 12, 2025
What to do if some notes don't play on PianoDisc PDS-228CFX Recording Equipment?
- A
  Angelica HallSep 12, 2025
  If some notes do not play properly on piano on your PianoDisc Recording Equipment and keys move but no sound is generated, the piano may need to be calibrated by a PianoDisc technician.