What to do if my Piazzetta Pellet stove has a power failure?
When power is restored to your Piazzetta Pellet stove, it will restart automatically. The cleaning phase will activate, and the display will show “CLEANING”. The room fan will run at full speed to distribute stored heat. The stove will then repeat the startup cycle and operate normally at power level 2 with Multifuoco on 2.
How to fix a failed ignition on my Piazzetta Pellet stove?
If your Piazzetta Pellet stove fails to ignite, it could be due to the flue gas outlet sensor not detecting a temperature increase or a lack of pellet feed. To resolve this, shut down the stove by pressing the ON/OFF key for a few seconds until the warning buzzer stops. The display will show 'CLEANING BRAZIER,' and then 'OFF' once cooled. Empty the grate completely and initiate a new ignition cycle, referring to the LOAD AUGER table in the PARAMETERS MENU. Then, repeat the ignition process.
What to do if my Piazzetta Pellet stove switches off during the start phase?
If your Piazzetta Pellet stove switches off during the start phase, empty the grate completely before starting a new ignition cycle. Keep the ON/OFF key pressed down to make the readout disappear and return to the initial display.
How to manually light my Piazzetta Pellet stove in an emergency?
If the glow plug on your Piazzetta Pellet stove isn't working, you can manually light the stove. Pour a small amount of pellets into the grate, use a lit, solid firelighter (not liquid) to ignite the pellets, close the door, and then start the stove using the ON/OFF button.
Essential safety advice for handling, fire cement, asbestos, and metal parts.
Critical warnings regarding chimney, flue, and fire hazards to prevent fires.
Pre-installation checks, chimney soundness, and flue system requirements.
Importance of fresh air intake for combustion and room ventilation.
Specifies minimum distances from combustible materials for walls, ceilings, and floors.
Guidance on connecting to conventional or external flue systems.
Requirements for electrical connections and general fire prevention measures.
Overview of product features, technical data, and specifications.
Visual representation of product dimensions for installation planning.
Details on recommended wood pellets, storage, and usage guidelines.
Procedures for unpacking and preparing the product for installation.
Guidance on installing the insert within housing and cladding.
Instructions for convective air outlets and the Multifoco System.
Procedures for fixing the appliance base and installing optional supports.
Details on power supply, room probe, and external thermostat connections.
Basic operation rules, safety during use, and warnings.
Step-by-step guide for loading pellets into the hopper.
Explains the use and functions of the LCD remote control.
Procedures for initial lighting, startup phases, and daily operation.
How to set the clock, programs, and timers for automated operation.
Schedule and importance of regular maintenance for efficiency and safety.
Instructions for cleaning the brazier, combustion chamber, flue, glass, and fans.
Guidance on replacing windows, remote batteries, and general checks.
Explains alerts from safety devices like smoke box depression and thermal safety.
Lists common problems, their causes, and solutions for appliance issues.
Instructions for safely replacing fuses on the electronic board.
General| Model | IP 78/68 |
|---|---|
| Category | Indoor Fireplace |
| Type | Pellet Stove |
| Energy Class | A+ |
| Efficiency | 90% |
| Pellet Hopper Capacity | 18 kg |
| Consumption per hour min | 0.6 kg/h |
| Consumption per hour max | 1.8 kg/h |
| Weight | 140 kg |
| Flue Diameter | 80 mm |
| Remote Control | Yes |
| Heating Technology | Convection |
| Fuel Type | Pellets |
| Control | Digital |
| Power Supply | 230V / 50Hz |
To Next Page
