To Next PageTo Next PageWhy does the water temperature constantly increase in my Pichler Sania 1550 Swimming Pool?
If the water temperature in your Pichler Swimming Pool is constantly increasing, it's likely due to the filter pump and ozone generator getting very warm during operation, especially in warmer months or well-heated rooms. To resolve this, try removing the insulation cover from time to time.
What to do if I see water leakage from my Pichler Sania 1550?
If you notice water leaking from your Pichler Swimming Pool, start by checking all compression couplings of heating and pumps, as a gasket might have yielded.
How to fix a defective ozone generator in my Pichler Sania 1550 Swimming Pool?
If the ozone generator in your Pichler Swimming Pool is defective, you should replace it.
What to do if Pichler Sania 1550 Swimming Pool has water leakage?
If you have water leakage, tighten the compression couplings of pump 2 with both hands as strong as possible.
What to do if water is leaking from the mixing valve cap of my Pichler Swimming Pool?
If you observe water leaking from the mixing valve cap of your Pichler Swimming Pool, you will need to replace the rotary shaft seal or O-seal!
How to fix sparkling air jets that don't work in Pichler Sania 1550?
If the sparkling air jets in your Pichler Swimming Pool aren't working, try adjusting the positions on the servo valves and air control.
Guidelines for connecting the whirlpool to the electrical supply.
Step-by-step instructions for assembling the filter unit.
How to fill the whirlpool with water to the correct level.
Procedure for replacing filter leaves and cotton regularly.
Recommendations for cleaning the acrylic tub of the whirlpool.
Advice on using water additives and scent dispenser bags.
Instructions for cleaning the indoor insulation cover.
Steps for draining water from the whirlpool.
Instructions for refilling the whirlpool after draining.
Method for removing residual water using a wet and dry exhauster.
Procedure for removing water from sparkling air jets.
Instructions for managing the outlet valve during draining.
Ensuring protection of the whirlpool exterior when not in use.
Overview of error messages displayed by the whirlpool controller.
Steps to troubleshoot non-functional sparkling air jets.
Diagnosing and resolving issues with continuous water temperature increase.
Detailed guide on how to remove the outer skirt for maintenance.
Troubleshooting steps for identifying and fixing water leaks in the whirlpool.
Checking and addressing leaks related to servo valves.
Procedure for replacing a faulty ozone generator.
Recommends changing the non-return valve when replacing the ozone generator.
How to adjust jet output using electrical valve controls.
Important information for managing the whirlpool's valve controls.
Description and adjustment of the powerful turbo jets.
How to adjust and operate the rotary jets for massage effects.
Information on acupressure jets and their adjustment.
How to adjust air-water mixture for different jet intensities.
Details on sparkling air jets providing full body massage.
Explains the mood and effects associated with different light colours.
Basic principle of how colours mix to create white light.
Instructions for connecting the whirlpool to the main power supply.
General| Brand | Pichler |
|---|---|
| Model | Sania 1550 |
| Category | Swimming Pool |
| Language | English |
