Caution:
1. Disconnect power before servicing.
2. The components identified by on the
schematic diagram are considered critical
with respect to the risk of fire and electric
shock associated with the product. Replace
these components with the parts recom-
mended by the manufacturer only.
3. Make leakage-current (0.5 mA max. ) or re-
sistance measurements (10 M ohm min.)
to determine that exposed parts are accept-
ably insulated from the supply circuit before
returning the appliance to the customer.
THIS DOCUMENT AND THE INFORMATION ENCLOSED HEREIN IS PROPRIETARY TO PICO MACOM INC.
AND UNLESS SPECIFIED UNDER A WRITTEN AGREEMENT; MAY NEITHER BE REPRODUCED OR COPIED
IN WHOLE OR IN PART OR DISCLOSED TO OTHERS, NOR EMPLOYED FOR DESIGN PROCURMENT, OR
MANUFACTURING PURPOSES WITHOUT THE WRITTEN PERMISSION OF PICO MACOM INC.
To Next Page
Loading...