03 04
ENEN
❶
Install Batteries
Pull the tab to remove the insulating paper by following the picture.
*Note: The 1.5V AA alkaline batteries are recommended to use.
Slide the battery cover according to arrow direction with your palm.
❷
Power on the Controller
❸
Power on the VR Headset
First Start: The Controller will start automatically after removing the
insulating paper.
Others: Short press the HOME button for 1 second until the status
indicator ashes blue.
Long press the POWER button for 2 seconds until the status indicator
turns blue.
Quick Guide
To Next Page
Loading...