Do you have a question about the PICO RTC DS3231 and is the answer not in the manual?
Chip | DS3231 |
---|---|
Interface | I2C |
Operating Voltage | 2.3V to 5.5V |
Temperature Range | -40°C to +85°C |
Battery | CR2032 |
Battery Backup | Yes |
Battery Voltage | 3V |
RTC Clock Frequency | 32.768 kHz |
Type | Real-Time Clock |
Accuracy | ±2ppm from 0°C to +40°C, ±3.5ppm from -40°C to +85°C |
Alarms | Two programmable alarms |
Square Wave Output | 1 Hz |
Highlights the module's capabilities, including header compatibility and precision RTC chip.
Details operating voltage, backup voltage, and temperature range.
Explains the function of each pin on the module for hardware interfacing.
Provides the physical measurements of the RTC module.
Guides on preparing the development environment for Pico.
Instructions for integrating and using the module with Raspberry Pi.
Guides for using the module with C and Python programming languages.
Specific instructions for setting up and using the module on Windows.
Links to sample code and recommended development software.
Series of tutorials covering MicroPython, C/C++ and general Pico topics.
Steps to install Arduino IDE and configure it for Pico development.