PicoBrew C - Page 62

To Next Page

To Previous Page

122

123

pico c instruction manual

Use the Keg Brush to scrub the inside of the

Serving Keg, making sure to get in contact with all

internal walls and crevices of keg, and the outside

of the keg making sure to get the top opening and

any spot that had contact with beer. Scrub the

Dispensing Bung and rinse with clean water.

Re-assemble the Dispensing Bung Plug. The

plastic pieces are molded so that they ﬁt into

each other.

1₀

Place Serving Keg over a waste container or sink.

Pull the spout of Serving Keg outward. Twist the

spout counter clockwise to start dispensing the

cleaning agent water from keg and through the

spout. Let ﬂow into sink or waste container for

approximately 10 seconds. Turn spout clockwise

to stop dispensing water.

unboxing setup

first

rinse

let's

brew

after

brewing

ferment

your beer

dry

hopping

rack &

carbonate

serving

usage &

care

sous vide glossary