EasyManua.ls Logo

Pier Deco AQUAMASSAGE PD-890 - User Manual

Pier Deco AQUAMASSAGE PD-890
8 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Owner’s manual
PD-890

Questions and Answers

  • J
    Jeremy BensonAug 5, 2025
    How to increase water temperature on Pier Deco Kitchen & Bath Fixtures?
    • S
      Sandy NguyenAug 5, 2025
      If the water temperature is not hot enough, try the following: First, press the push button on the top of the thermostatic handle and turn it counterclockwise. Ensure that the water heater temperature is set to 60°C (140°F). Finally, make sure that there is no air in the water pipes.
  • D
    Diane StoneAug 11, 2025
    What to do if the water pressure is going down gradually in Pier Deco AQUAMASSAGE PD-890?
    • K
      Kaylee ConradAug 11, 2025
      If the water pressure is gradually decreasing, check the filters in the gaskets at the water entry and on the thermostatic cartridge. Also, inspect all pipes going to the shower for upside-down 'U' shapes, ensuring they are not kinked or twisted.
  • L
    lreillyAug 17, 2025
    Why is there noise coming from the water line in Pier Deco AQUAMASSAGE PD-890?
    • J
      James BrownAug 17, 2025
      If you hear noise coming from the water line when the shower column is in use, it could be due to air pockets in your plumbing. Check for these. Also, inspect all pipes going to the shower for upside-down 'U' shapes, ensuring they are not kinked or twisted.
  • M
    Michael GreenAug 23, 2025
    What to do if water temperature gets increasingly colder with Pier Deco Kitchen & Bath Fixtures?
    • M
      mdiazAug 23, 2025
      If the water temperature is getting increasingly colder, the problem is likely with your water heater. Test the hot water faucet of the sink; if the water there is also cold, the issue is with the water heater. The tank may be empty, so wait 30 minutes and try the test again.
  • J
    Jennifer PowellAug 28, 2025
    Why is cold water coming out when the faucet is set on hot water on my Pier Deco AQUAMASSAGE PD-890?
    • M
      Mrs. Laurie ReynoldsAug 29, 2025
      If cold water comes out when the faucet is set to hot, check the two stainless steel hoses at the back of the shower column. The hot and cold hoses are probably reversed.

Summary

TECHNICAL SPECIFICATIONS

TEST DATA

Provides water flow rate data for different pressure levels and functions.

INTRODUCTION

IMPORTANT NOTICE BEFORE INSTALLING THE PRODUCT

Key advice before starting the installation process for the shower column.

THERMOSTATIC SHOWER COLUMN

Explains the function and temperature control of the thermostatic valve.

LIST OF PARTS AND COMPONENTS IN THE BOX

INSTALLATION

INSTALLATION DIAGRAM

Illustrates the steps and connections required for mounting the shower column.

INSTALLATION NOTES

Provides critical warnings and advice for a successful installation.

HOW TO SET & USE YOUR NEW SHOWER COLUMN

TEMPERATURE PRESET

Details the default temperature setting and how to adjust it.

MAINTENANCE

HOW TO CLEAN THE JETS

Step-by-step guide for cleaning the shower head and body jets.

THERMOSTATIC CARTRIDGE MAINTENANCE

Advice on maintaining the thermostatic cartridge to prevent issues.

TROUBLESHOOTING

ATTENTION

A critical notice regarding warranty voidance and contact information.

WARRANTY

ATTENTION

Lists conditions that will void the product's limited warranty.

Pier Deco AQUAMASSAGE PD-890 Specifications

General IconGeneral
BrandPier Deco
ModelAQUAMASSAGE PD-890
CategoryKitchen & Bath Fixtures
LanguageEnglish