Need help?Do you have a question about the Pieralisi MAIOR HS Series and is the answer not in the manual?
Main operational guide for the centrifugal extractor, covering setup and use.
Details customer responsibilities, warranty conditions, and general safety precautions.
Covers operator qualifications, training, responsibilities, and essential safety prescriptions.
Covers operator health checks, psychophysical fitness, and work clothing requirements.
Describes the machine's purpose, operating principle, and ATEX version suitability.
Provides detailed technical specifications for machines with fixed return transmission.
Provides detailed technical specifications for machines equipped with a Rotovariator.
Provides detailed technical specifications for machines equipped with a second motor.
Lists overall dimensions and weight specifications for different MAIOR models.
Details how the machine is shipped and the need for special packaging if required.
Provides instructions for safely unloading and lifting the machine from the transport vehicle.
Covers environmental conditions for machine operation, including temperature and illumination.
Guidance on site preparation, machine positioning, fastening, and environmental notes.
Details electrical connection requirements, safety, and grounding, with warnings.
Lists essential checks before starting the machine, including power disconnection and bowl status.
Details the automatic start-up sequence for the machine and feed pump.
Details the procedure for flushing the machine with water after operation or before shutdown.
Details the normal and emergency shut-down procedures, including transition times.
Covers residual risks during operation and the necessary conduct rules for safety.
Provides a periodic table for routine maintenance tasks and their frequencies.
Provides strict instructions for lubrication of machine components, including gears and bearings.
Details procedures for replacing drive belts on different machine versions (fixed return, rotovariator, back drive).
Details lubrication procedures for the rotovariator, including grease type and intervals.
Details actions to take when stopping the machine for extended periods.
Identifies causes and remedies for the machine failing to start or stopping shortly after.
Diagnoses causes for the machine stopping shortly after start-up, due to speed control issues.
Addresses normal vibrations and causes of excessive vibration, suggesting checks and assistance.
Covers problems with solid sediment separation, including regulator ring, scroll wear, and polyelectrolyte.
General| Lighting | LED |
|---|---|
| Type | Hood |
| Series | MAIOR HS |
| Material | Stainless Steel |
| Depth | 50 cm |
| Height | 50 cm |
| Frequency | 50/60 Hz |
To Next Page
