CP600 Pivot Operators Manual
OPERATION, SAFETY & MAINTENANCE
Section 1-26
© Pierce Corporation
July 2010
Tires Pressure check X X X
Wheel Bolts
Tighten
torque 115-120
ft lbs
X
X X
X X
X
Structure
Inspect for loose
or missing bolts
X X X
Automatic Switching
Devices
Check for binding
X X X
Auto Reverse Lubricate X X X
#2 Barium /Lithium
based grease or
equivalent quality
#2 water-resistant
grease
Auto Stop Lubricate
X X X
#2 Barium /Lithium
based grease or
equivalent quality
#2 water-resistant
grease
End Gun Lubricate
X X X
#2 Barium /Lithium
based grease or
equivalent quality
#2 water-resistant
grease
Component Operation
Start of
Season
Before
Operation
100 hrs 400 hrs
End of
Season
Oil / Lube
Note: The charts listed above are intended to be used as a quick reference. Review the sections that
pertain to the equipment being serviced or the individual manufacturers warranty for specific details.
Lube and Oil Charts
To Next Page
Loading...
