CP600 Pivot Operators Manual
OPERATION, SAFETY & MAINTENANCE
Section 1-4
© Pierce Corporation
July 2010
Winterization see manufacturers specifi cations Sec-
tion 1-22.
CAUTION: Hard hat and steel toe work boots recommended when assembling
equipment
CAUTION: Be aware of pinch points when assembling equipment.
CAUTION: Could cause minor injury and or damage to machinery equip-
ment, components, product, etc.,
Note: Manufacture’s general comment, recommendation or
instruction.
Lock Out / Tag Out Manufacturer recommends locking the main power dis-
connect before servicing or troubleshooting electrical components. See
CAUTION or WARNING Disconnect electrical power prior to servicing
or troubleshooting components.
WARNING: DO NOT ATTEMPT TO ASSEMBLE OR TROUBLESHOOT MA-
CHINERY
IF THERE IS POTENTIAL FOR A LIGHTENING STORM. COMPO-
NENTS ARE HIGHLY CONDUCTIVE AND SERIOUS INJURY OR POSSIBLE
DEATH MAY OCCUR IF STRUCK BY LIGHTENING.
DANGER: DO NOT IRRIGATE NEXT TO POWER LINES.
SPRAYING WATER ON POWER LINES COULD CAUSE
SERIOUS INJURY OR DEATH.
Safety Symbols, Pictures and Defi nitions
To Next Page
Loading...
