How to increase water temperature in PierDeco Bathroom Fixtures?
To increase the water temperature in your PierDeco Bathroom Fixtures, try the following: First, press the push button on the top of the thermostatic handle and turn it counterclockwise. Also, ensure that your water heater temperature is set to 60°C (140°F). Finally, check that there is no air trapped in the water pipes.
What to do if the water pressure is low in PierDeco Bathroom Fixtures?
If you're experiencing a gradual decrease in water pressure with your PierDeco Bathroom Fixtures, here's what you can do: Start by checking the filters in the gaskets at the water entry and on the thermostatic cartridge. Also, make sure that there are no upside-down 'U' shapes in the pipes leading to the shower, and ensure they are not kinked or twisted.
General| Model | PD-876 |
|---|---|
| Brand | PierDeco |
| Material | Acrylic |
| Color | White |
| Type | Freestanding |
| Heater | Yes |
| Voltage | 110V |
| Warranty | 2 years |
To Next Page