EasyManuals Logo

Pifco P29004 User Manual

Pifco P29004
8 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
6)When using the Steam Mop on carpet surfaces: Place the Mop Head,
with Microber Cloth in place, on top of the carpet glider as illustrated in Fig. 6a.
Do not attempt to use the Steam Mop unit on carpet/rug surfaces without
the carpet glider in place.
Notice: Never use the carpet glider on surfaces that are prone to scratching.
CAUTION
Never assemble or remove the accessories while the unit is in operation
Insert the Power Supply Cord into the
Cord Holder located at the top of the
Extension Handle as illustrated in Fig.4c
and then insert Power Supply Cord
into the
Upper Cord Wrap as illustrated in Fig.
4d.
5)Place the Mircober Cloth on the
bottom of the Mop Head and make
sure all the loops on the cloth are
aligned with the gripping hooks on the
bottom of the Mop Head (Refer to
Fig.5a),then press the cloth against the
Mop Head so the loops on the cloth
catch the gripping strips on the Mop
Head and hold the pieces together.
HOW TO USE THE STEAM MOP
PLEASE READ BEFORE USING THE STEAM MOP
The Steam Mop is designed to thoroughly clean oor surfaces, such as marble,
ceramic, carpet, stone, linoleum, and sealed hardwood oors and parquet.
Not all oor types are suitable for steam cleaning.
The heat and steam action my remove the wax on surfaces treated with wax. Do not
use on unsealed ooring or let unit stand on any wood or heat sensitive oor for an
extended period of time. This could cause the wood grain to rise, in addition to other
types of damage.
When using on vinyl, linoleum or any other heat sensitive oors, use extra caution.
Too much heat can melt glue in the ooring. Use only on laminated ooring that has
been laid professionally and without any gaps or cracks that would permit the entry
of moisture.
Test the Steam Mop on a small isolated area of your ooring prior to overall use on
any oor surface.
Always check the use and care instructions of your ooring manufacturer or distribu-
tor before using the Steam Mop.
When in doubt,please consult a ooring specialist. Only use the carpet glider
on carpeting and rugs
Use of the carpet glider on other oor surfaces will cause streaking and possibly
scratching.
NOTICE
This product emits steam and creates moisture. Water marks, discolouration
or damage to the oor surface can occur if the unit is left operating too long
in one place.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Pifco P29004 and is the answer not in the manual?

Pifco P29004 Specifications

General IconGeneral
BrandPifco
ModelP29004
CategoryVacuum Cleaner
LanguageEnglish

Related product manuals