EasyManuals Logo

Pilot Communications CL-3022WK User Manual

Pilot Communications CL-3022WK
11 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
www.dashcamsupport.com
INSTALLATION
INSTALLATION
5 6
www.dashcamsupport.com
MOUNT TO WINDSHIELD
1. Carefully clean surface area where you
intend to mount dashcam.
POWER
1. Plug 12V power adapter into vehicle’s
12V power (cigarette lighter) port.
3. To manually power on the device,
PRESS AND HOLD the Power button
until the display activates.
2. Plug mini-USB end into dashcam. The unit
will automatically turn on and start
recording. Press OK button to stop recording.
3. Flip locking lever to secure suction cup
in place. The suction cup can be moved
freely by disengaging and re-engaging
the locking lever.
2. Press suction cup FIRMLY onto
the windshield.
Peel plastic film
off of suction cup.
4. Slide dashcam onto suction cup mount.
Once dashcam is positioned correctly,
tighten thumbwheel nut to secure in place.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Pilot Communications CL-3022WK and is the answer not in the manual?

Pilot Communications CL-3022WK Specifications

General IconGeneral
BrandPilot Communications
ModelCL-3022WK
CategoryDash Cameras
LanguageEnglish

Related product manuals