To Next PageTo Next Page
Need help?Do you have a question about the Pilote 88 S1 BR4 and is the answer not in the manual?
Specifies vibration levels at the handlebar, measured in m/s².
Describes the Vee-belt and clutch type belt tensioner and chain drive.
Indicates the operating speed of the cutting tools in RPM.
Information on how to adjust the handlebar height for user comfort.
States the measured noise level at the operator's ear in dB(A).
Steps for attaching the main support structure (stanchion).
Instructions for adjusting the handlebar height and angle.
Procedure for installing and assembling the clutch control lever.
Guidance on how to position the tiller for safe transport.
Instructions for adjusting the tilling depth using the drag leg.
Lists the weights for different tiller models (SI BR4, SI BR6, etc.).
Detailed steps to adjust the clutch mechanism for proper engagement.
Critical warning about the danger posed by moving cutting tools.
Essential safety gear required for safe operation of the tiller.
Checks and fluid levels required before starting the engine.
Safe and correct steps for starting the engine.
Routine checks, cleaning, and lubrication for the tiller.
Procedures for oil checks, filter care, and spark plug inspection.
Explanation of the "Attention Danger" symbol and its implications.
Essential rules for protecting the operator during tiller use.
Requirement for all repairs to be performed by qualified service centers.
Guidance on when and why to disconnect the spark plug connector.
General
