PIMORONI Fan SHIM for Raspberry Pi

To Next Page

Fan SHIM for Raspberry Pi

PIM461

Make your Raspberry Pi 4 seriously cool with Fan SHIM! This

30mm no-solder, controllable CPU fan with RGB LED and

tactile switch will give your Raspberry Pi significantly better

thermal performance. It's whisper-quiet too!

Fan SHIM uses a friction-fit header, so it just slips onto your Pi's pins and it's ready to go, no

soldering required! Note that, due to the height of the fan, if you want to use HATs or pHATs

with Fan SHIM, then you'll need to use a booster header.

Need help?

Do you have a question about the PIMORONI Fan SHIM for Raspberry Pi and is the answer not in the manual?

Summary

Highlights the product's specifications including fan size, RPM, noise level, and compatibility.

Lists the items included in the Fan SHIM kit: PCB, fan with connector, and mounting hardware.

Provides a step-by-step guide for physically assembling the Fan SHIM onto a Raspberry Pi.

Explains how to control the fan, RGB LED, and switch using a Python library and daemon service.

Guides users to a detailed tutorial and provides important notes on handling and compatibility.

General