EasyManua.ls Logo

PINBALL TECHNOLOGY NW7 - User Manual

Default Icon
21 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...




 !"#
$%&'( )))*+,-.&/0*&
Question and Answer IconNeed help?

Do you have a question about the PINBALL TECHNOLOGY NW7 and is the answer not in the manual?

Summary

Preamble and Product Overview

Package Contents and Warranty Information

Package Contents List

Details the items included in the NW7 board package.

Warranty Terms and Conditions

Details the terms and conditions of the two-year limited liability warranty for the NW7 board.

Installation Steps and Procedures

Required Installation Equipment

Lists tools and materials necessary for the installation process.

Pre-Installation Checks and Warnings

Highlights essential checks and safety precautions before commencing installation.

Step 1: Accessing the Sound Board

Instructions for unlocking the cabinet, lifting the playfield, and locating the sound board.

Step 2: Disconnecting Connectors

Guidance on disconnecting connectors from the sound board and routing them.

Step 3: Securing the Playfield

Instructions to lower the playfield and replace the glass after initial disconnections.

Step 4: Accessing Electronic Boards

Procedure to unlock the backbox and open the door to access the main electronic boards.

Step 5: Removing Old Boards

Instructions for disconnecting all connectors and removing the original CPU, Driver, and sound boards.

Step 6: Positioning Driver Board Rails

Guidance on placing intermediate screws for the driver board rails without tightening.

Step 7: Adjusting Driver Board Rail

Instructions to slightly unscrew the right rail's fixing screws for translation.

Step 8: Mounting the NW7 Board

Steps for unpacking and mounting the NW7 board using screws set in the previous step.

Step 9: Securing the NW7 Board

Instructions to mount and tighten the lower screws for the NW7 board.

Step 10: Finalizing Board Securing

Tighten upper screws and right rail screws to secure the NW7 board.

Step 11: Harness Collar Adjustment

Unscrew upper collars holding the harness, and potentially remove other collars.

Step 12: Connecting Harnesses

Detailed instructions for connecting all specified connectors to the NW7 board using the wiring plan.

Step 13: Securing the Harness Position

Using removed collars to secure the harness in the bottom rail mounting holes.

Step 14: Configuring DIP Switches

Adjusting Game Select DIP Switches according to the specific pinball game.

Operation and Maintenance

Getting Started with NW7

Guides the user on initial power-on, LED indicators, and display information upon startup.

Adjusting Sound Volume

Describes the two methods for controlling the sound volume, depending on cabinet configuration.

Troubleshooting NW7 Board Issues

Provides diagnostic steps using LEDs and a table of error codes with corresponding solutions for common problems.

MicroSD Card Usage and Content

Details the µSD card format, content, and how to manage firmware and audio files for the NW7 board.

Sound Customization Options

Explains how to replace default sound files with custom WAV files for enhanced audio personalization.

Jukebox Mode Configuration

Covers the setup and parameters for enabling and customizing the jukebox feature on the NW7 board.

Updating NW7 Firmware

Outlines the procedure for updating the NW7 board's firmware using a specific system file.

PINBALL TECHNOLOGY NW7 Specifications

General IconGeneral
BrandPINBALL TECHNOLOGY
ModelNW7
CategoryComputer Hardware
LanguageEnglish