Pine Crafter Furniture 72 User Manual

72 – 72wo
READ THESE INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE THIS BED
MATTRESS SIZES…
Bed Mattresses Specifications:
Use only a mattress meeting the following specifications on the upper bunk bed.
Bed Type Width Length Bed Type Width Length
Standard Twin 37½”-38½” 74”-75” XL Twin 37½”-38½” 79”-80”
Standard Full 52½”-53½” 74”-75” XL Full 52½”-53½” 79”-80”
Total thickness of both mattress and foundation MUST NOT EXCEED 6½” for upper bunk.
SAFETY WARNINGS AND GENERAL NOTES
Follow information on the warnings appearing on the upper bunk end structure and on the carton.
Do not remove warning label from bed.
Always use the recommended size mattress or mattress support, or both, to help prevent the likelihood
or entrapment or falls.
Surface of mattress must be at least 5 in. (127mm) below the upper edge of guard rails.
Do not allow children under 6 years of age to use the upper bunk.
Periodically check and ensure that the guardrail, ladder, and other components are in their proper
position, free from damage, and that all connectors are tight.
Do not allow horseplay on or under the bed and prohibit jumping on the bed.
Always use the ladder for entering and leaving the upper bunk.
Do not use substitute parts. Contact the manufacturer or dealer for replacement parts.
Use of a night light may provide added safety precaution for a child using the upper bunk.
Always use guard rails on both sides of the upper bunk.
The use of water or sleep floatation mattresses is prohibited.
Prohibit more than one person on the upper bunk.
Keep these instructions for future references.
We recommend assembling your bunk bed on the shipping carton to protect your floor or carpet. Be
certain all staples are out of the box before beginning assembly on the shipping carton.
Strangulation Hazard - Never attach or hang items to any part of the bunk bed that are not designed
for use with the bed; for example, but not limited to, hooks, belts and jump ropes.
REPLACEMENT PARTS
Replacement parts, including additional guardrails, may be obtained from any of our Pine Crafter
dealers.
Hardware – (Actual Size not Shown)
Hex Key
#72=1
#72wo=1
30mm Bed
Bolt and
Cap Nut
#72=16
#72wo=8
70mm Lag
Bolt Screw
#72=8
#72wo=8
3-1/2”
Wood
Screw
#72=4
#72wo=4
Caster
w/Insert
#72=4
#72wo=0
L-Bracket
w/3/4” Screw
#72=8
#72wo=8
Bed Wire and
1” Screw
#72=6
#72wo=3

Pine Crafter Furniture 72 Specifications

General

Brand	Pine Crafter Furniture
Model	72
Category	Indoor Furnishing
Language	English

Summary

Mattress Size Specifications

Approved Mattress Dimensions

Specifies mattress dimensions and thickness limits for the upper bunk bed for safety.

Safety Warnings and General Notes

General Safety Precautions

Comprehensive safety guidelines including guardrail height, age limits, structural checks, and usage rules.

Assembly and Usage Tips

Recommendations for assembly on the carton and prohibiting unauthorized items to prevent hazards.

Replacement Parts

Hardware Identification

Carton Contents

#72 Carton Containers

Lists components and hardware included in the #72 model bunk bed cartons.

#72wo Carton Containers

Lists components and hardware included in the #72wo model bunk bed cartons.

Tools Required for Assembly

Assembly Instructions

Upper Bunk Assembly Steps

Detailed steps for assembling the upper bunk headboards, footboards, and guard rails.

Positioning and Securing Upper Bunk

Instructions for placing the upper bunk onto the chest/desk and securing with L-brackets.

Lower Bunk and Caster Attachment

Steps for assembling the lower bunk, inserting casters, and rolling it into place.

Final Component Attachments

Instructions for attaching the ladder and securing bed wires to the cleated rails.