04
01
Seal will come partially assembled with
the baseplate bolted on. Carefully place
Seal upturned onto a supporting structure
ensuring seal doesn’t get damaged in the
process by using furniture blankets etc.
02
03
Remove all the security bolts and carefully
lift out the baseplate.
Place sand (x2 for 2-seater) into strong bags
either side of the partition box and ensure
they are sealed with the cable ties.
Replace the baseplate then attach the cups
using the M10 security screws. Finally tap in
the caps to finish off the feet.
T
E
inquiries@pineapplecontracts.com
To Next Page
Loading...