Pinegreen Lighting 12000LM - User Manual

USER MANUAL #CL-BU-G120 | 12000LM/100W LED GARAGE LIGHT WITH 4 PANELS
USER MANUAL #CL-BU-G120 | 12000LM/100W LED GARAGE LIGHT WITH 4 PANELS
CARE FOR YOUR PRODUCT:
Your product will last for many years with minimum care. Therefore, it is
essential to clean the product periodically. Use a soft, non-abrasive cloth or
a mild, non-abrasive glass cleaner. It is essential NOT to use any solvents or
harsh cleaning agents. When cleaning, make sure the power is OFF. Do
not spray liquid directly onto the product or wiring. Instead, spray or pour a
small amount into the cloth and clean the product.
CARE FOR YOUR PRODUCT:
This product has a two-year warranty from the date of purchase—
this guarantees against failure due to factory defects, whether caused
by materials or workmanship. The warranty is non-transferable and
only pertains to the original purchaser. Proof of purchase is required
for any repair or replacement, so please keep your proof of purchase
receipt. This warranty does not cover normal wear and tear or
damage due to misuse. Misuse of this product includes but is not
limited to:
• Using outdoors in extreme weather conditions.
• Opening the product’s housing.
• Any attempts to update, remodel or x the unit yourself.
WARNING:
YOU SHOULD ALWAYS FOLLOW BASIC PRECAUTIONS.
Read, follow, and understand all instructions and warnings before beginning any
installation of this product. Failure to do so can result in electric shock, re, or
other injuries, including death. This product should be installed following these
instructions, electrical codes, and by the National Electric Code (NED). Save this user
manual for instructions and warnings for possible future relocation and installation.
CAUTION:
• This product is not waterproof and is designed for dry use only.
• Avoid environments with extreme dust and/or humidity.
• DO NOT use on radiant heated surfaces.
• DO NOT remove the lens protecting the LED.
• DO NOT use near a gas source.
• DO NOT open the product. It is NOT possible to change the LED lights or source.
• This product is not intended for use in possible explosive areas. It should
never be in an area of exposure to vapor elements.
• This product is not a toy and should stay out of children’s hands.
TROUBLESHOOTING:
Problem Possible Cause Solution
The product does The power is o Check the power supply and make sure it is ON
not turn on Bad connection Check the wiring
Faulty switch Test and/or replace the switch
Circuit breaker Discontinue use immediately Call customer service 1-888-745-4837
trips or fuse blows Call an electrician
when light is turned on
Lumen: 12000LM
Watts: 100W
Equivalent: 700W Incandescent
LED Lifespan: 30,000 Hours
Operating Voltage: 120-277V
CRI: 80
Color Temp (CCT): 6500K Daylight
Base: E26 / Standard Edison
Damp Rated Yes
Operating
Temperature: -40°F to 104°F
(-40°C to 40°C)
EYES:
• DO NOT look directly at the LED lights.
• DO NOT remove the LED lights protective covering.
If you have questions or missing parts, please contact our customer care at 1-888-745-4837 If you have questions or missing parts, please contact our customer care at 1-888-745-4837
WARNING:
RISK OF ELECTRICAL SHOCK.
TO AVOID ELECTRICAL SHOCK, MAKE SURE TO TURN
OFF THE MAIN POWER SOURCE OR DISCONNECT POWER
DURING THE INSTALLATION OR SERVICE
OF THIS PRODUCT
Ballast must be bypassed if present.

Summary

Product Care Instructions

Cleaning Guidelines

Essential cleaning advice using soft cloth and mild cleaner, ensuring power is off.

Troubleshooting Guide

Product Not Turning On

Troubleshoots 'product not turn on' issues like power, connection, or faulty switch.

Circuit Breaker Tripping

Addresses circuit breaker tripping or fuse blowing issues.

Warranty Information

Warranty Coverage Details

Details a two-year warranty against factory defects, non-transferable, requires proof of purchase.

Additional Warnings

Usage Restrictions

Covers opening product, enclosure size, temperature, water, dimmers, and wiring.

Installation Instructions

Step-by-Step Installation

Instructions for installation, including turning off power, removing old bulb, screwing in new unit, and adjusting panels.

Overview

1. Function Description
2. Important Technical Specifications
3. Usage Features
4. Maintenance Features

This document is a user manual for the PINEGREEN LIGHTING CL-BU-G120, a 12000LM/100W LED Garage Light with 4 Panels.

Function Description:

The CL-BU-G120 is an LED garage light designed to provide bright illumination for medium to large size rooms, such as garages. It features four adjustable light panels, allowing users to pivot each panel to direct light where it is most needed. The light is designed to screw into a standard E26 socket, replacing traditional incandescent or CFL bulbs. It operates by drawing power from the main electrical source, and its LEDs illuminate when the light switch is turned on. The product is intended for dry use only and is not waterproof.

Important Technical Specifications:

• Model Number: CL-BU-G120
• Lumen Output: 12000LM
• Power Consumption: 100W
• Equivalent Incandescent: 700W
• LED Lifespan: 30,000 Hours
• Operating Voltage: 120-277V AC
• CRI (Color Rendering Index): 80
• Color Temperature (CCT): 6500K Daylight
• Base Type: E26 / Standard Edison
• Damp Rated: Yes
• Operating Temperature Range: -40°F to 104°F (-40°C to 40°C)
• Number of Panels: 4 adjustable light panels
• Dimmers: Not compatible; use with dimmers will damage the product and void the warranty.
• Ballast: Must be bypassed if present in the existing fixture.
• FCC Compliance: This device complies with Part 15 of the FCC rules, ensuring it does not cause harmful interference and accepts any interference received.

Usage Features:

• Easy Installation: The light screws into a standard E26 socket in a clockwise direction. It is recommended to pivot each light panel down before screwing in the unit to avoid overtightening and potential damage to the light or socket.
• Adjustable Light Panels: The four LED panels can be individually pivoted to direct light to specific areas, optimizing illumination for the space.
• High Brightness: With 12000 lumens and 6500K Daylight color temperature, it provides powerful and clear lighting suitable for work environments.
• Energy Efficient: As a 100W LED, it offers significant energy savings compared to its 700W incandescent equivalent.
• Long Lifespan: The LEDs are rated for 30,000 hours, reducing the frequency of bulb replacement.
• Safety Precautions:
  • Always turn off the main power source or disconnect power at the circuit breaker before installation or service to avoid electrical shock.
  • A surge protector is highly recommended.
  • Never look directly into the LED lights, even when adjusting the panels, to protect your eyes.
  • Do not remove the lens protecting the LED lights.
  • Do not use in small enclosures; recommended for medium to large size rooms.
  • Not waterproof; designed for dry use only. Avoid environments with extreme dust, humidity, or standing water.
  • Do not use on radiant heated surfaces or near a gas source.
  • Do not open the product; LED lights or source are not replaceable by the user.
  • Not intended for use in explosive areas or areas exposed to vapor elements.
  • Not a toy; keep out of children's hands.
  • Ensure no bare wires are exposed and all wiring is insulated during installation.

Maintenance Features:

• Cleaning: The product requires minimal care. Periodically clean it using a soft, non-abrasive cloth or a mild, non-abrasive glass cleaner.
• Cleaning Precautions:
  • Always turn OFF the power before cleaning.
  • Do NOT use any solvents or harsh cleaning agents.
  • Do NOT spray liquid directly onto the product or wiring; instead, apply a small amount to the cloth and then clean the product.
• Troubleshooting:
  • Product does not turn on: Check if power is off (turn ON), bad connection (check wiring), or faulty switch (test/replace switch).
  • Circuit breaker trips or fuse blows when light is turned on: Discontinue use immediately and call customer service (1-888-745-4837) or an electrician.
• Warranty: The product comes with a two-year warranty from the date of purchase, covering factory defects in materials or workmanship.
  • The warranty is non-transferable and applies only to the original purchaser.
  • Proof of purchase is required for any repair or replacement.
  • The warranty does not cover normal wear and tear or damage due to misuse.
  • Misuse includes: using outdoors in extreme weather conditions, opening the product's housing, or attempting to update, remodel, or fix the unit yourself.
• Customer Support: For questions, missing parts, or warranty claims, contact customer care at 1-888-745-4837.

Pinegreen Lighting 12000LM Specifications

General

Brand	Pinegreen Lighting
Model	12000LM
Category	Lighting Equipment
Language	English