EasyManua.ls Logo

Pinnacle Outdoor GardenShed User Manual

Default Icon
31 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
GardenShed
3.0W x 2.3D x 2.4Hm
Tools required: Drill, measuring tape, Phillips-head screw driver, rivet gun, rubber mallet, sturdy ladder, shifting spanner, 2 saw horses, 3mm
steel drill bit, 4mm steel drill bit and a 9mm masonry drill bit.
Assembly instructions
3.0m Gable Series
Congratulations on purchasing your new Pinnacle garden shed. Before assembling, we recommend
you read the instructions thoroughly. Your new shed comes with pre-drilled holes to make assembly
quicker. We recommend you assemble the shed using a trestle table or sawhorses and planks. This
will ensure that you are working off the ground and make it easier for you. Assembly is a two-person
job and should not be attempted in windy conditions.
Question and Answer IconNeed help?

Do you have a question about the Pinnacle Outdoor GardenShed and is the answer not in the manual?

Pinnacle Outdoor GardenShed Specifications

General IconGeneral
BrandPinnacle Outdoor
ModelGardenShed
CategoryOutdoor Storage
LanguageEnglish

Summary

Garden Shed Assembly Guide

Safety Precautions for Assembly

Essential safety advice for shed assembly, including wearing protective gloves and eyewear.

Essential Tools for Assembly

List of all necessary tools and equipment required for the garden shed assembly process.

Concrete Slab Installation Guide

Recommendations for preparing a level concrete slab, including dimensions and drainage slope.

Step 1: Parts Inventory Check

Procedure for verifying all shed components against the parts list before beginning assembly.

Step 2: Rear Wall Panel Assembly

Detailed instructions for assembling the rear wall panels of the garden shed.

Step 3: Side Wall Panel Assembly

Instructions for assembling and attaching the side wall panels to the shed structure.

Step 4: Roof Panel Assembly

Guidance on assembling the roof panels, joining sheeting and associated channels.

Step 5: Front Wall Panel Assembly

Steps for assembling the front wall panels, including fitting jambs and channels.

Step 6: Front Door Construction

Instructions for assembling the shed's front doors, fitting parts, braces, and protective covers.

Step 7: Integrating Shed Panels

Procedure for fitting all major assembled panels together and securing the overall structure.

Step 8: Shed Anchoring and Bracing

Instructions for using the bolt down kit for secure anchoring and strengthening internal braces.

Pinnacle Shed Warranty Details

Manufacturer Contact and Support

Contact details for Pinnacle Hardware and New Zealand support for warranty inquiries.

Warranty Terms and Conditions

Information on the 15-year structural warranty, coverage, and conditions for parts.

How to Make a Warranty Claim

Procedure for submitting a warranty claim, required proof of purchase, and manufacturer's obligations.

Warranty Exclusions and Limitations

Situations not covered by the warranty, such as improper assembly or damage from storms.

Important Product Usage Notes

Key notes on product weatherproofing, condensation, and recommendations for sealant use.

Consumer Rights and Major Defects

Details on consumer rights under ACL, handling major defects, and replacement/refund policies.