Pinnacle Spas PINNACLE PLUS PN 850 - User Manual

HOT TUB OWNER’S MANUAL
MODELS:
PINNACLE PLUS – PN 631, PN 741, PN 743,
PN 850, PN 855
LUXURY – LX 4000, DX 5000, LX 5000,
LX 8000, LX 9000, LX 11000
6101 45
th
St. N.
St. Petersburg, FL 33714
800.304.9684
www.PinnacleSpas.com
Part Number 7636
SKUs: (1001-1011)
Revised 5/11

Summary

Important Safety Information

Location and Installation

Electrical Specifications

Startup Procedures

Before Adding Water

Steps to prepare the hot tub before filling with water.

Filling Your Hot Tub

Instructions on how to properly fill the hot tub with water.

Operational Checks

Procedures for checking the hot tub's operation after filling.

PN Model Startup Procedure

Specific startup steps for PN model hot tubs.

Topside Control Operations

Setting Water Temperature

How to adjust the desired water temperature on the control panel.

Setting Filtration Cycles

Procedures for programming the hot tub's filtration cycles.

Control Panel Models Overview

Mode Selection

Preset Filter Cycles

Smart Winter Mode

Error Codes for PN Models

Water Management and Chemistry

pH Levels and Fluctuation

Troubleshooting and Error Codes

General Troubleshooting Guide

Common problems and their solutions for hot tub issues.

Error Codes for LX Models

Explanations and required actions for LX model error messages.

Maintenance and Care

Sanitation Levels

Shutdown; Winterizing

Pinnacle Spas PINNACLE PLUS PN 850 Specifications

General

Seating Capacity	6-7
Water Capacity	450 gallons
Number of Jets	50
Voltage	240V
Shell Material	Acrylic
Jets	50
Pumps	2
Heater	4kW
Cabinet Material	Synthetic
Insulation	Full foam
Control System	Balboa