VII. Appendix: Installation for usage with Windows MCE
If you have a PC equipped with Microsoft® Windows® Media Center Edition
2005 (MCE) and want to watch and record TV using the Windows Media Center
application, please follow these steps (after having installed the hardware as
described):
1. Make sure you have installed the latest Windows updates.
2. Make sure a MCE certified DVD player software is installed on your PC.
3. Run the PCTV_MCE2005_Setup.exe installer from the MS MCE2005 folder on
the Pinnacle MediaCenter installation CD.
4. Follow the steps of the installation wizard.
5. Please reboot your PC if prompted to do so.
6. Open the Windows Media Center application by double-clicking on the desktop
icon (or via Start – Programs – Media Center).
7. Go to Settings – TV – Set up TV signal and follow the instructions of the TV
configuration wizard.
8. If the automatic TV source selection does not detect your TV signal, please
choose “manual” and select the TV connection type that is appropriate to your
configuration.
Note: The included remote control is not compatible with MCE; you will need a
specific MCE remote control kit (separately available, please check on
http://www.pinnaclesys.com).
FCC conformity statement
The FCC declarations of conformity and identical construction for this product
can be downloaded from http//www.pinnaclesys.com/compliance.
To Previous Page
Loading...
