Setup Installation
STEP 1
Before installation, check the parts
and accessories. Insert the upper
part of stand into the lower part.
STEP 2
Please Use 2xM6*14 hexagonal screw
and 2 base plates with 5#Allen Wrench
to lock the back tube.
Then Please Use 1xM6*14 hexagonal
screw and 1 base plates with 5#Allen
Wrench to lock the front tube.
STEP 3
Connect the 2 cords.
STEP 4
Then insert the lower end of the stand
into the rectangular hole.
To Next Page
Loading...