This document provides an installation manual for a 2-DIN car radio installation kit, specifically designed for various Ford models. The kit facilitates the integration of a new 2-DIN head unit into the vehicle's dashboard, replacing the original factory radio. The product is identified as "2-DIN 12.301114-33 Piano Black," indicating its size, a specific model number, and a "Piano Black" finish, which refers to the aesthetic color and texture of the replacement panel and trim.
Function Description:
The primary function of this installation kit is to enable the seamless replacement of a single-DIN or proprietary factory radio with a standard 2-DIN aftermarket head unit. A 2-DIN head unit is a double-height car stereo, offering a larger display and often more advanced features such as navigation, touchscreens, and enhanced multimedia capabilities compared to standard single-DIN units. The kit provides all the necessary components to securely mount the new head unit and ensure it integrates aesthetically with the vehicle's interior. This includes a metal bracket for structural support, a replacement panel to fill the gap left by the original radio and accommodate the new unit, and a radio trim to provide a finished look around the new head unit. The kit also includes mounting plates, spacers, screws, and radio keys, which are essential tools for removing the original radio and installing the new components.
Important Technical Specifications:
- Type: 2-DIN Car Radio Installation Kit.
- Model Number: 12.301114-33.
- Color/Finish: Piano Black. This specifies the aesthetic appearance of the visible components, such as the replacement panel and radio trim, ensuring they match or complement the vehicle's interior.
- Compatibility:
- Ford Focus: 2004 and newer models.
- Ford C-Max: All models.
- Ford Fiesta: 2006 and newer models.
- Ford S-Max: 2006 and newer models.
- Ford Galaxy: 2006 and newer models.
This broad compatibility indicates that the kit is designed to fit a range of Ford vehicles, suggesting a standardized dashboard opening or a flexible design that can adapt to minor variations across these models.
- Kit Contents:
- 1x 2-ISO 100 mm. metal bracket: This is the primary mounting frame, designed to hold the 2-DIN head unit securely within the dashboard. The "2-ISO 100 mm" likely refers to the standard dimensions for 2-DIN units, ensuring broad compatibility with aftermarket radios.
- 1x Replacement panel: This component replaces the original radio bezel or fascia, providing the correct opening and aesthetic for the new 2-DIN unit.
- 1x Radio trim: A decorative frame that fits around the installed head unit, covering any gaps and providing a clean, finished look.
- 2x Mounting plates: These are likely used to attach the head unit to the metal bracket.
- 2x Mounting spacers: Used to adjust the depth or alignment of the head unit within the bracket, ensuring a flush fit.
- 4x Screws: For securing various components during installation.
- 2x Cushion: Likely used for vibration dampening or to prevent scratching.
- 2x Radio keys: Essential tools for safely removing the original factory radio from the dashboard without causing damage.
Usage Features:
The installation process is designed to be straightforward, guiding the user through the necessary steps to replace the original radio with a new 2-DIN unit.
- Removal of Original Radio: The first step involves carefully removing the original factory radio. The included radio keys are crucial for this, as they allow for the release of the radio's locking mechanisms without damaging the dashboard or the radio itself.
- Installation of Replacement Panel: Once the original radio is removed, the replacement panel is installed. This panel is specifically designed to fit the Ford models listed, ensuring a factory-like appearance.
- Mounting the Head Unit: The 2-ISO metal bracket is used to house the new 2-DIN head unit. The mounting plates and spacers are then utilized to secure the head unit within this bracket, ensuring it is properly aligned and flush with the replacement panel. The manual provides specific guidance for different Pioneer head unit models (HD1BT and Avic D3) regarding the optimal screw positions for mounting. For the Pioneer HD1BT, it recommends using position 1 (marked with a cross) and positions 14 & 16 (marked with an arrow), measured from left to right. For the Pioneer Avic D3, it also recommends position 1 (marked with a cross) and positions 9 & 11 (marked with an arrow), measured from left to right. It also states that other positions are possible, offering flexibility.
- Wiring Connections: After the mechanical installation, all necessary wiring harnesses must be connected. This typically involves connecting the new head unit to the vehicle's power, ground, speaker wires, and any other relevant connections (e.g., antenna, steering wheel controls, reverse camera). The manual emphasizes the importance of checking all connections carefully to ensure proper functionality and prevent electrical issues.
- Final Assembly: The head unit, now secured within the metal bracket and replacement panel, is then inserted into the dashboard opening. The radio trim is applied around the head unit to complete the installation, providing a clean and integrated look.
Maintenance Features:
As an installation kit, the product itself does not require ongoing maintenance. However, proper installation is crucial for the longevity and performance of the new head unit and the vehicle's electrical system.
- Careful Handling: During installation, careful handling of all components, especially the replacement panel and radio trim, is important to prevent scratches or damage to the "Piano Black" finish.
- Secure Connections: Ensuring all wiring harnesses are securely connected and properly insulated will prevent loose connections, short circuits, and potential damage to the head unit or vehicle electronics.
- Correct Mounting: Using the specified mounting positions and screws ensures the head unit is stable and does not vibrate or become loose over time, which could lead to internal damage or poor performance.
- Professional Installation (Optional but Recommended): While the manual provides clear steps, individuals unfamiliar with car audio installations may benefit from professional assistance to ensure all connections are made correctly and the installation is aesthetically pleasing and functionally sound. This can prevent common issues such as improper wiring, poor fitment, or damage to the vehicle's interior.
In summary, this 2-DIN installation kit is a comprehensive solution for upgrading the car audio system in compatible Ford vehicles. It provides all the necessary components and instructions to replace the factory radio with a modern 2-DIN head unit, enhancing the vehicle's multimedia capabilities and interior aesthetics.
To Next Page
Need help?
General
