e This
guide
explains the
usage
of
and
necessary settings for this unit.
Please
follow the procedure
to
complete
the
settings.
Do
not
lose
this
guide.
e Refer
to
the
USER'S
MANUAL found
on
the supplied CD-ROM
or
on
the
Web
for
details
of
other
settings and uses
not
explained in
this
guide.
Refer
to
"The
USER'S
MANUAL"
on
the reverse
for
more details.
e
Some
Pioneer
products
that
connect
to
this
product
will
need
to
be
configured. Refer
to
their respective
USER'S
MANUAL
for
more details.
e For technical enquiries regarding this product, refer
to
"Please
Read
First"
for
Support Centre details.
Features
Connect
the
following
Pioneer
A V
devices
using
a
Wireless
LAN.
AV RECEIVER Blu-ray
Disc
player
Wireless
LAN
Converter
(this unit)
Connect
supported
AV
devices
easily
over
a
Wireless
LAN
using
this
unit.
Wireless LAN
router
(base)
ADSL modem
ONU
(Optical
Network
Unit)
Wired
router.
etc.
Setup Procedure
STEP3
Check the Base
* Check
that
the base has no problem connecting
to
the Internet.
Connect the
Unit
e If the base has a
WPS
button
~Follow
the
instructions
in
"Step 2 Connect the Unit
(WPS)"
to
connect
the
unit
to
the
base.
e
If
the base does not have a
WPS
button
~Follow
the
instructions
in
"Step 2 Connect the Unit
(Manual)"
to
connect
the
unit
to
the
base.
*
If
you have problems using the
"WPS
Button."
use
the "Manual" procedure.
Step 3 Connect AV Devices
Preparation
Prepare
the
following.
D Wireless LAN Converter
(this
unit)
D LAN/USB feeder cable (included) * This cable is a combination
of
a
LAN
cable and a
USB
feeder cable
that
supplies power
to
the
unit
without
using an
AC
adapter.
Use
the supplied cable only.
D Getting Started
(this
guide)
D Supported AV device, computer
(not
included)
D Internet connection
(not
included)
Part
Names
Front
Back
Side
1 I
CD®®
®®
®
CD
POWER
indicator
®
POWER
connector
0)
RESET
button
®
WPS
indicator
@
ETHERNET
port
@
WIRELESS
indicator
®
WPS
button
Before Configuring the Unit
e
If
you
do
not
have
an
Internet
connection,
subscribe
before
configuring
the unit.
e
Do
not
connect the LAN/USB feeder cable
to
a USB hub.
STEP1
Check the Base
0
Check
that
the
Wireless
LAN
router
(base)
has
no
problem
connecting
to
the
Internet.
0
Modem
Wireless
LAN
rou•:t:e:r"111•~;;~-
(base)
Computer
This procedure requires a separate Wireless LAN router (base).
If
you do not have a base. please prepare one.
Check
that
the
base
has
a WPS
function.
Refer
to
the
Wireless
LAN
router
user's
manual
for
details.
WPS
is a function
that
configures the base connection and security
using a button.
•
Some
bases have
WPS
written on them.
~
If
the base has a
WPS
button
Continue
to
"Step
2
(WPS)"
and
"Step
3"
.
.....
If
the base
does
not
have
a
WPS
button
Continue
to
"Step
2
(Manual)"
and
"Step
3".
To Next Page
Need help?
General
Weight and Dimensions
