Pioneer AVIC-EVO1-DT2-C-GR User Manual

This guide is intended to guide you through the basic functions of
this navigation system. For details, please refer to the Operation
Manual provided with the product.
Basic hardware buttons (Example)
1 HOME
Press to display the Top menu
screen.
2 MAP
Press to display the Map
screen.
3 MODE
Press to switch between the
Application screen and the AV
operation screen.
4 VOL (+/–)
*1
Rotate to adjust the AV source
volume.
Press to switch to the power off
mode.
*2
5 SOURCE (SRC)
*3
Press to cycle through all the
available sources.
6 MUTE
*3
Press to mute the AV source.
7 CAR
*3
Press to display the vehicle
information screen.
8 Rotary encoder
*1
Rotate clockwise or anti-
clockwise to go to the next
track (chapter) or return to the
previous track (chapter).
*1 If your vehicle doesn’t have any knob or encoder, it may be replaced with or .
*2 This function is only available with the button or knob with power on/off function.
*3 Not available for all vehicles.
English
Quick Start Guide
NAVIGATION AV SYSTEM
AVIC-EVO1
< CRD4996-A > EU
© 2017 PIONEER CORPORATION.
All rights reserved.

Pioneer AVIC-EVO1-DT2-C-GR Specifications

General

Screen Size	7 inches
Touchscreen	Yes
Navigation	Yes
DAB+	Yes
Apple CarPlay	Yes
Android Auto	Yes
Bluetooth	Yes
USB Port	Yes
HDMI Input	No
Voice Control	Yes
Wi-Fi	Yes
Resolution	800 x 480 pixels

Summary

Basic Hardware Buttons

HOME Button

Press to display the Top menu screen.

MAP Button

Press to display the Map screen.

MODE Button

Switch between Application and AV operation screens.

Volume Control

Adjust AV source volume or switch to power off mode.

SOURCE (SRC) Button

Cycle through available AV sources.

MUTE Button

Mute the AV source.

CAR Button

Display vehicle information screen.

Rotary Encoder

Navigate tracks or chapters by rotating.

Navigation Menu Screens

Search Destination

Find destinations by address, coordinates, or points of interest.

Build/Edit Route

Create a new route or modify an existing one.

Traffic Information

View real-time traffic conditions.

Navigation Settings

Configure navigation-related settings and SyncTool.

Search Location by Address

Initiate New Route Search

Start the process to find a new route.

Enter Destination Address

Input address details to set the destination.

Select Destination

Confirm the chosen location as the destination.

Start Navigation

Begin the route guidance to the selected destination.

Pairing Bluetooth Devices

Activate Bluetooth

Access Bluetooth Screen

Initiate Device Connection

Select Device to Pair

Using Hands-Free Phoning