Do you have a question about the Pioneer AVIC-Z830DAB and is the answer not in the manual?
Live service | - |
---|---|
Languages support | ARA, BUL, CZE, DAN, DEU, DUT, ENG, ESP, EST, FIN, FRE, GRE, HEB, HUN, ITA, LAT, LIT, NOR, POL, POR, RUM, SER, SLK, SLV, SWE, TUR, UKR |
Number of points of interest | 10000000 |
Traffic Message Channel (TMC) | Yes |
Bluetooth version | 4.1 |
Cables included | USB |
FM band range | 87.5 - 108 MHz |
DAB band range | 174.928 - 239.200 MHz |
Supported radio bands | DAB, FM, LW, MW |
Hands-free calling | Keep your hands on wheel with Bluetooth™ Hands-free calling. After pairing your compatible Bluetooth mobile phone to your TomTom GPS, you’ll be able to see incoming call information, make and answer calls, and talk hands-free through your device. You’ll e |
Audio formats supported | AAC, FLAC, MP3, WAV, WMA |
Image formats supported | JPEG |
Video formats supported | H.264, MPEG4, VC-1, WMV, WMV7, WMV8 |
Maximum power per channel | 50 W |
Operating temperature (T-T) | -10 - 60 °C |
Display diagonal | 7 \ |
Display resolution | 2520 x 480 pixels |
Display size (HxV) | 156.24 x 81.6 mm |
Native aspect ratio | 16:9 |
Map storage | Internal storage |
Map coverage | Andorra, Australia, Belgium, Bulgaria, Croatia, Czech Republic, Denmark, Estonia, Finland, France, Germany, Gibraltar, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Monaco, Netherlands, Norway, Poland, Portugal, Romania, San Marino, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey, Ukraine, United Kingdom |
Number of countries covered | 45 |
Form factor | Plug-in |
Product color | Black |
USB 2.0 ports quantity | 2 |
Storage media type | Flash |
Compatible memory cards | SD |
Internal storage capacity | 16 GB |
Input current | 10 A |
Operating voltage | 14.4 V |
Power source type | DC |
Depth | 100 mm |
---|---|
Width | 178 mm |
Height | 158 mm |
Weight | 2000 g |
Procedure to reset the system to factory default settings for troubleshooting.
Initial steps to power on the system and configure basic settings.
Initial setup process for using the navigation function for the first time.
Instructions on how to interact with the touch screen interface.
Methods to find and set a destination address for route calculation.
How to begin route guidance after selecting a destination.
Configuring various system preferences for navigation behavior.
Steps to establish a wireless connection with Bluetooth devices.
Using the system for phone calls via Bluetooth.
Streaming audio wirelessly from a Bluetooth device.
Configuring navigation and AV source preferences.
Adjusting sound profiles, EQ, and speaker levels.
Resetting the system to factory default configuration.
Common issues and their solutions for product operation.
Explanations for error codes and corrective actions.
Precautions for inserting, ejecting, and cleaning discs.