Pioneer CLD-900 User Manual

f aenelWes 1\
BUTE ETE
COMPACT DISC/
Operating LASERVISION PLAYER
Instructions
IMPORTANT NOTICE (For KU model)
The serial number for this equipment is located on the rear
panel. Please write this serial number on your enclosed
warranty card and keep in a secure area. This is for your
security.
CAUTION: Use of controls or adjustments,
or performance of procedures other than
those specified herein may result in hazardous
radiation exposure.
WARNING:
TO
PREVENT
FIRE
OR
SHOCK
HAZARD,
DO
NOT
Ex-
POSE
THIS
APPLIANCE
TO
RAIN
OR
MOISTURE.
LO-9S00
Thank
you
for
buying
this
Pioneer
product,
Please
read
these
operating
instructions
thoroughly,
so
you
will
know
how
to
operate
your
model
properly.
After
you
have
finished
reading
the
instructions,
put
them
away
in
a
safe
place
for
future
reference,
These
operating
instructions
are
based
on
the
model
KU,
and
they
can
be
used
for
the
S/G
model.
The
differences
between
the
models
are
given
below.
KU model: For U.S.A. (“KU” printed on packing case).
Power line voltage is 120 volts.
S/G model: “S/G” printed on packing case.
A 4-point (110V/120V/220V/240V) voltage
selector switch is provided.
NOTE FOR S/G MODEL
The voltage selector switch is located on the rear panel of the
player. Please check that it is set properly before plugging the
power cord into an outlet. It is is not set properly, change the
setting of it according to the VOLTAGE SELECTOR on page 10.
Use this player with discs bearing the following mark.
rf
LaserVision
(LaserVision Disc)
NOTE:
This player is to be used exclusively with the NTSC color system.
Please use NTSC LaserVision Discs. PAL and SECAM system
LaserVision Discs cannot be used with this player.
GlISe
DIGITAL AUDIO
(Compact Disc)
Y) PIONEER’
é
7
a
a
E
i
4
&
"sO TENSE STOREY ETE EE RS PSG TE ET SESE SHS UCT Ssh RA OSES

Pioneer CLD-900 Specifications

General

Brand	Pioneer
Model	CLD-900
Category	CD Player
Language	English