EasyManua.ls Logo

Pioneer CLD-1500 HEM User Manual

Pioneer CLD-1500 HEM
152 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Question and Answer IconNeed help?

Do you have a question about the Pioneer CLD-1500 HEM and is the answer not in the manual?

Pioneer CLD-1500 HEM Specifications

General IconGeneral
Disc CompatibilityLaserdisc, CD
Audio OutputAnalog (RCA)
Video OutputComposite (RCA)
Laser TypeSemiconductor laser
Number of Channels2
Frequency Response4 Hz to 20 kHz
Total Harmonic Distortion0.003%
Output Voltage2.0 V
Power RequirementsAC 120V, 60Hz

Summary

1. Safety Information

5. Schematic and P.C. Boards Diagrams

5.1 Schematic Overall Wiring Diagram

Overall wiring diagram for the unit's schematics.

5.2 Power Supply Board Assembly

Schematic for the power supply board assembly.

5.3 PALB Board Assembly

Schematic for the PALB board assembly.

5.4 ASCB Board Assembly (FTS Section) and Pickup Assembly

Schematics for ASCB and Pickup assemblies.

5.5 ASCB Board Assembly (DSP Section) and Headphone Board Assembly

Schematics for ASCB (DSP) and Headphone assemblies.

5.6 ASCB Board Assembly (AFM and SPDL D Section)

Schematics for ASCB (AFM/SPDL) assemblies.

7. Disassembly

7.1 Removing the Bonnet and Front Panel

Procedure for removing the unit's bonnet and front panel.

7.2 Removing the Tray

Procedure for removing the disc tray.

7.3 Removing the PALB, VDTB and ASCB Board Assembly

Procedure for removing the PALB, VDTB, and ASCB boards.

7.6 Removing the Pick-up Assembly

Procedure for removing the pick-up assembly.

8. Test Mode

How to enter the test mode

Steps for entering the service test mode.

9. Adjustments

9.3 Mechanism Adjustments

Procedures for adjusting the mechanism.

1. Tilt Gain Adjustment

2. Grating Coarse Adjustment and Tracking Error Balance Adjustment

3. Slider Shaft Levelness Adjustment

4. Pick-up Inclination Adjustment

5. Focus Error Balance Adjustment

6. Tilt Sensor Adjustment

7. Tilt Balance Adjustment

8. Spindle Motor Centering Check and Adjustment

10. Focus Servo Loop Gain Adjustment

11. Tracking Servo Loop Gain Adjustment

12. RF Gain Adjustment

13. VCO Frequency Adjustment

14. VCXO Frequency Adjustment

15. PD0011A Clock Adjustment

9.4 Electrical Adjustments

Related product manuals