Need help?Do you have a question about the Pioneer CLD-D770 and is the answer not in the manual?
Block diagram showing system components and their interconnections for specific models.
Detailed system block diagram for CLD-D703 and CLD-D770 models.
Block diagram illustrating system and mode control functions for specific models.
System control block diagram for CLD-D503 and CLD-D570 models.
System control block diagram specific to the CLD-S360 model.
Details the serial interface connection between the device's microcomputers.
Explains the communication protocol and timing between microcomputers.
Overview of the mechanism control system, initialization, and motor control.
Flowchart illustrating the process from tray opening to tray insertion.
Flowchart for LD playback setup, including focus and disc detection.
Flowchart for CD setup, including focus lock and spindle acceleration.
Flowchart for searching CLV/CAV discs without TOC, detailing scan modes.
Flowchart for searching CLV discs with TOC, including track counting and jumps.
Flowchart detailing the process of turning the disc from Side A to Side B.
Flowchart detailing the process of turning the disc from Side B to Side A.
Lists mecha steps and descriptions for the open mode.
Lists mecha steps and descriptions for the standby mode.
Lists mecha steps and descriptions for the stop mode.
Lists mecha steps and descriptions for the disc sense mode.
Lists mecha steps and descriptions for the set up mode.
Lists mecha steps and descriptions for the TOC read mode.
Lists mecha steps and descriptions for the play mode.
Lists mecha steps and descriptions for the search mode.
Lists mecha steps and descriptions for the side A to B mode.
Lists mecha steps and descriptions for the side B to A mode.
Lists mecha steps and descriptions for the power off mode.
Lists mecha steps and descriptions for the recover mode.
Details mode control microcomputer functions, signal processing, and display.
Explains the theater mode for enhanced LD movie playback experience.
Describes the video digital noise reduction feature and its adjustment.
Explanation of the focus servo system, including operation and signal flow.
Explanation of the tracking servo system, signal flow, and jump operations.
Description of slider motor control, signal flow, and position detection.
Describes the RF signal amplification and processing stages.
Explains the main video signal path and processing steps.
Details the drop out detection and compensation system.
Explains synchronization and data separation for video signals.
Overview of the Digital Video Processor and its primary functions.
Description of spindle control signals and error generation mechanisms.
Explanation of the digital Time Base Corrector system architecture.
Description of the Sync Signal Generator (SSG) system features.
Overview of the memory control IC and its role in video processing.
Details the digital noise reduction process for video fields.
Explains field synchronization, compensation, character insertion, and sync delay.
To Next Page
General
