Need help?Do you have a question about the Pioneer CS-77A and is the answer not in the manual?
General| Type | 3-way, 3-speaker system |
|---|---|
| Impedance | 8Ω |
| Enclosure | Bass reflex |
| Woofer | 12 inch |
| Midrange | 5 inch cone |
| Frequency Response | 30Hz - 20kHz |
Utilizes a cone paper made with pulp and wool fibers for improved rigidity, lightweight, higher frequency characteristics, and reduced distortion.
Delivers rich, distortion-free music across a wide dynamic range with a 4-way system including woofer, mid-range, tweeter, and horn tweeter.
Features an efficient dividing network with a high-Q inductance coil on a ferrite core for better transient response and cleaner bass/mid-range tones.
Attractive furniture piece with lattice grille and polished walnut, designed for versatile placement and easy grille removal.
Connect the positive (+) output of the amplifier to the positive (+) input of the CS-77A and negative to negative, ensuring correct polarity.
Adjust mid-range and high-frequency level controls to achieve desired tone quality, with options for INCREASE, NORMAL, and DECREASE.
Attach the four furnished circular pads to the bottom of the CS-77A when placing it on the floor.
Includes impedance (8 ohms), cabinet waxing advice (every 3-4 months), and a warning against high signals/clicks with the back removed.
Details enclosure type, speaker components (woofer, mid-range, tweeter), crossover frequencies, and input impedance.
Provides frequency range (35-20,000 Hz), sensitivity (95 dB/W), maximum input power (65 W), and external dimensions.
To Next Page
