Why does my Pioneer DEH-4400BT display illumination turn on and off at random?
The display illumination may turn on and off randomly because the demo display setting is activated. To resolve this, turn off the demo display setting.
What to do if the sound will be played back when the call is terminated on Pioneer DEH-4400BT?
If the sound plays back after a call ends, it might be because a call was made and immediately terminated via a Bluetooth-connected cellular phone. This can cause improper communication between the unit and the phone. To fix this, avoid operating the cellular phone immediately after terminating a call.
Details class 1 laser product classification and safety requirements for continued use.
Explains setup for hands-free phoning and basic call operations like answering, ending, and rejecting calls.
Details tuner operations including band selection, recalling stations, tuning methods, RDS display, and PTY search.
Explains advanced iPod operations such as repeat play, random play, pausing, and sound retriever.
Guides on setting up Bluetooth audio, performing basic playback, and accessing the phone menu for call history and phone book.
Provides solutions for common operational issues and lists error codes with their causes and corrective actions.
General| Bluetooth | Yes |
|---|---|
| Radio Tuner | AM/FM |
| Display Type | LCD |
| Button Illumination | Red |
| Remote Control | Yes |
| High-Pass Filter | Yes |
| Low-Pass Filter | Yes |
| Subwoofer Output | Yes |
| RMS Power Output | 14 watts RMS x 4 |
| Peak Power Output | 50 watts x 4 |
| Preamp Outputs | 2V |
| Auxiliary Input | Front |
| USB Input | Front |
| Playback Formats | MP3, WMA, WAV |
| DIN Size | Single DIN |
| Equalizer | 5-band graphic equalizer |
To Next Page
