Need help?Do you have a question about the Pioneer DEH-P735R and is the answer not in the manual?
General| Brand | Pioneer |
|---|---|
| Model | DEH-P735R |
| Category | Car Receiver |
| Language | English |
Identifies controls and buttons on the main car stereo unit.
Identifies controls and buttons on the wireless remote.
Details about the car stereo system's features and compliance.
Instructions on how to reset the unit's internal microprocessor.
General safety and handling precautions for the product.
Instructions for operating and maintaining the remote control.
Safety and handling guidelines for the remote controller.
Safety and handling guidelines for product batteries.
Instructions for turning the car stereo system on and off.
Step-by-step guide to basic tuner functions like tuning, band selection, volume, and source control.
How to enable or disable the AF (Alternative Frequencies) function.
Navigating the menu to select tuner functions like BSM, REG, LOCAL.
Activating/deactivating local seek mode for strong signal reception.
Automatically stores strongest stations into memory under buttons 1-6.
Manually stores stations into memory using buttons 1-6.
How to recall stored radio stations via direct or sequential access.
Memorizing tuner functions (BSM, REG, LOCAL) into the PGM button.
Explanation of the Radio Data System and its features.
How to display station names instead of frequencies.
Displays program type information for the current station.
Displays the radio frequency of the current station.
Explains the Alternative Frequencies search function for better reception.
Searches for stations broadcasting the same programming on different frequencies.
Limits tuner selection to regional programs when AF is active.
Enables reception of traffic announcements automatically across sources.
Enables station selection by program type (PTY Search) and emergency alerts.
Initiates a search for stations broadcasting a specific program type.
Special PTY code for emergency announcements, triggering an alarm.
How to insert, play, and control basic functions of a CD.
Temporarily stops and restarts CD playback.
Accessing CD player functions like REPEAT, RANDOM, T-SCAN, PAUSE.
Accessing advanced settings like Disc Title Input.
Plays the same track or disc repeatedly.
Plays tracks on a CD in a random order for variety.
Plays the first 10 seconds of each track on a CD.
Allows entering titles for discs for easier searching.
Memorizing CD player functions like PAUSE, REPEAT, RANDOM into the PGM button.
Guidelines for selecting and caring for compact discs.
Precautions for handling CDs and the CD player.
Explains common error messages and their solutions.
How to select discs and tracks from a multi-CD changer.
Specifics for operating a 50-disc multi-CD player.
How to select between multiple connected multi-CD players.
Selecting discs directly using buttons 1-6 on 6/12-disc changers.
Selecting discs on a 50-disc changer using block search.
Temporarily stops and restarts playback from a multi-CD player.
Accessing multi-CD player functions like REPEAT, RANDOM, SCAN.
Accessing advanced multi-CD player settings like TITLE IN, ITS, PGM.
Adjusting compression and dynamic bass emphasis for sound quality.
Explains One-track, Disc, Multi-CD player, and All Repeat modes.
Plays tracks randomly from discs or multiple players.
Scans first tracks of discs or tracks within discs in multi-CD players.
Programming automatic playback of up to 24 tracks per disc.
Plays programmed tracks in order for ITS playback.
How to delete a previously programmed track from ITS.
How to delete all programmed tracks for a specific disc from ITS.
Entering titles for discs for easy searching and selection.
How to view entered disc titles on the display.
Playing discs by selecting them from a list of entered titles.
Searching and selecting discs by the first letter of their titles.
Assigning discs to groups for organized playback.
Playing only discs that belong to the selected music group.
Viewing the music group assigned to the currently playing disc.
Removing a disc from its assigned music group.
Playing discs based on play frequency order (most to least played).
Ejecting individual discs from a 50-disc multi-CD player.
Memorizing multi-CD player functions (LIST, ITS) into the PGM button.
Accessing audio settings like FAD, BAS, MID, TRE, LOUD.
Adjusting front-to-rear (fader) and left-to-right (balance) speaker output.
Adjusting bass, middle, and treble frequencies for tone control.
Compensates for low/high sound deficiencies at low volumes.
Switching sub-woofer output ON/OFF and adjusting phase.
Adjusting the cut-off frequency and output level of the sub-woofer.
Enhancing front imaging by adjusting mid/high frequencies from rear speakers.
Prevents radical volume changes when switching between audio sources.
Instantly reduces the system volume by approximately 90%.
Features designed to deter theft, including a detachable front panel.
Step-by-step instructions for removing the car stereo's front panel.
Step-by-step instructions for reattaching the front panel.
Alerts the user if the front panel is not detached within 5 seconds of ignition off.
Accessing the menu for initial product setup and configuration.
Adjusting the FM tuning step between 50 kHz and 100 kHz.
Enabling/disabling automatic PI Seek during preset recall.
Enabling or disabling the warning tone function.
Activating the auxiliary input mode for external equipment.
Adjusting display brightness for night viewing.
Choosing between green and red display illumination colors.
Setting up the removable front panel alert system.
Adjusting the delay period for the RFP alert system.
Selecting whether internal speakers sound when the RFP alert is triggered.
Adjusting the volume for the RFP alert's internal speaker.
Selecting between constant or pulsed output for connections like sirens or horns.
Choosing the correct door system type (positive/negative switching) for vehicle compatibility.
Verifying the correct door system type selection by checking door open/close behavior.
Disarming the RFP alert using the ignition key when the front panel is forgotten.
Selecting the door lock type for central locking systems.
Verifying the correct door lock type selection by observing door unlock behavior.
Overview of how the RFP alert system operates after setup.
Steps to arm the RFP alert system by turning off the ignition and detaching the panel.
Procedures for disarming the RFP alert system.
How the RFP alert is triggered by unauthorized entry or door opening.
How to display and set the current time on the unit.
Resetting the clock to zero to sync with time announcements.
Activating the auxiliary input for external audio devices.
Entering custom titles for the auxiliary input mode.
Automatic muting of audio during cellular phone calls.
To Next Page