Need help?Do you have a question about the Pioneer DEH-P9100R and is the answer not in the manual?
General| Brand | Pioneer |
|---|---|
| Model | DEH-P9100R |
| Category | Car Receiver |
| Language | English |
How to install the unit using a rubber bush.
Illustrates the fundamental wiring setup for the car stereo.
Details how to connect external power amplifiers using RCA output jacks.
Overview of the RFP Alert feature and its purpose.
Explains how the RFP Alert system interacts with vehicle door switches.
Instructions for connecting to grounding type door pin switches.
Instructions for connecting to positive type door pin switches.
Guidance on installing separately sold pin switches for added protection.
Identifies buttons and controls on the main car stereo unit.
Details the buttons and functions of the remote control.
Provides information on product compliance and regional usage.
Introduces the manual and its purpose for users.
Explains how to reset the unit's microprocessor under specific conditions.
Describes the Reverse Demo and Feature Demo modes.
Explains the automatic screen reversal feature.
Details the automatic demonstration mode for product features.
Explains the meaning of various indicators and symbols on the display.
Describes specific operations related to DAB tuner functions.
How to cycle through different display labels for DAB services.
Notes that this product does not support changing display indications.
How to manage audio announcements using the Function Menu.
Explains how to select DAB services from a stored list.
Important safety and usage precautions for the product.
Guidance on what to do if the product malfunctions.
How to operate the unit using the steering wheel remote.
Information on the battery used in the remote control.
Steps for installing the lithium battery into the remote controller.
Instructions on how to replace the remote control's lithium battery.
Initial steps and procedures for playing music from various sources.
How to operate the built-in radio tuner.
Methods for tuning to radio stations.
How to store and recall favorite radio stations.
How to operate the internal CD player.
How to change the information shown on the CD player display.
Instructions for ejecting a CD from the player.
How to display text information from CD TEXT discs.
How to search for specific tracks or fast forward/reverse playback.
Information about inserting CDs into the player.
How to open the front panel of the CD player.
How to control an external multi-CD player.
How to change the display for multi-CD player operation.
How to select discs from a multi-disc changer.
Method for selecting discs from a 50-disc changer.
Explains how display indicators guide button usage.
How to tune to strong reception stations only.
How the unit automatically stores the strongest stations.
Explanation of the Radio Data System and its features.
How station names replace frequencies on the display.
Displays Program Type ID code for the current station.
Shows the current station's frequency.
How the unit searches for stronger frequencies in the same network.
Steps to turn the AF function on or off.
Searches for stations broadcasting the same program via different frequencies.
Enables PI Seek during preset recall for long-distance travel.
Limits tuner selection to regional programs when AF is active.
How to turn the Regional function on or off.
Allows automatic reception of traffic announcements.
Steps to activate or deactivate the Traffic Announcement function.
How to stop a traffic announcement and return to the previous source.
How to set the volume for traffic announcements.
Notifies the user when a TP station signal is weak.
Allows selection of stations by program type and automatic tuning to emergency broadcasts.
Steps for searching for stations based on Program Type codes.
Controls automatic reception of PTY code news programs.
Automatic tuning to emergency broadcasts using PTY code.
How to cancel an announcement and return to the original source.
A list of Program Type codes and their corresponding program details.
How to repeat playback of a track, disc, or magazine.
How to play tracks in a random order.
Plays the beginning of each track on a CD.
How to pause the currently playing track.
How to select tracks using a title list for CD TEXT discs.
How to input custom titles for CDs.
Different repeat play ranges for multi-CD players.
Random playback for multi-CD players.
Scanning tracks on selected discs or within the multi-CD player.
How to pause playback on a multi-CD player.
Adjusts sound quality using Compression and Dynamic Bass Emphasis.
How to enable or disable Compression and DBE functions.
Allows programming and playback of selected tracks from a multi-CD player.
How to program tracks for ITS playback.
How to activate ITS playback of programmed tracks.
How to remove a programmed track from ITS memory.
How to erase all programmed tracks for a disc.
How to input custom titles for discs in the multi-CD player.
How to select discs using their input titles.
How to select tracks using their input titles.
How to choose from preset equalizer curves.
How to access the first audio adjustment menu.
Details the functions available in Audio Menu 1.
How to adjust speaker fader and balance settings.
Overview of graphic equalization and its types.
Explains the 'Flat' and 'Custom' equalizer settings.
Methods for selecting and applying equalizer curves.
How to cycle through equalizer curves.
How to fine-tune equalizer curves.
Adjusting factory equalizer curves.
Detailed adjustment of equalizer levels across 13 bands.
Functions for adjusting sound field and bass.
How to select preset sound field programs.
Method to directly select a sound field program.
Method to cycle through sound field programs.
Adjusts sound image position based on seating.
Confirms current listening position settings.
Steps to set the listening position for optimal sound.
How to turn subwoofer output on/off and adjust phase.
How to adjust subwoofer cut-off frequency and output level.
Controls the non-fading output feature.
How to adjust the level of the non-fading output.
Filters out low frequencies from front/rear speakers.
Compensates for low/high frequency deficiencies at low volumes.
Automatically adjusts volume based on ambient noise.
Prevents volume leaps when switching audio sources.
Precautions and warnings before performing auto-equalization.
Specific conditions that may damage speakers or affect measurement.
Essential steps and checks before starting auto-equalization.
Step-by-step guide to performing the auto-equalization process.
How to initiate the auto-equalization measurement.
Information displayed upon completion of auto-equalization.
How the system indicates successful auto-equalization.
Lists error messages and their solutions during auto-equalization.
How the detachable front panel deters theft.
Steps for safely removing the detachable front panel.
Steps for reattaching the front panel.
Describes the warning tone when the front panel is not detached.
How to access the product's initial setup menu.
Lists the configurable settings in the Initial Setting Menu.
How to adjust FM tuning step for seek tuning.
Prioritizes DAB traffic info over TA function.
Controls Auto PI Seek function during preset station PI Seek.
How to enable or disable the warning tone.
How to activate or deactivate the auxiliary (AUX) input mode.
Configures rear speaker output for full-range or subwoofer.
Selects internal or external subwoofer controller.
Adjusts display brightness when headlights are on.
Options to choose between green and red illumination colors.
Reduces distortion by lowering signal level for high-recording-level sources.
Options to choose from three display wallpaper designs.
How to adjust the display's brightness level.
Steps to enable and configure the RFP Alert system.
How to adjust the delay time before the RFP Alert arms.
Controls whether the internal speaker sounds when RFP Alert is triggered.
How to adjust the volume level of the RFP Alert speaker output.
Configures the system to match the vehicle's door switch type.
Verifies correct door system type selection.
How the RFP Alert system functions in arming and disarming.
Procedure for arming the RFP Alert system.
Procedure for disarming the RFP Alert system.
Describes how the system triggers and sounds if not disarmed.
How to change the display to various visual modes.
Steps to assign functions to the PGM button.
How the PGM button operates for different functions.
How to connect and use external audio devices via AUX.
How to choose the AUX input as the audio source.
How to assign a display title for the AUX source.
How the system mutes audio during a cellular call.
Important precautions for playing and handling CDs.
Lists common error messages and their solutions.
To Next Page
