Need help?Do you have a question about the Pioneer DEQ-7200 and is the answer not in the manual?
General| Brand | Pioneer |
|---|---|
| Model | DEQ-7200 |
| Category | Computer Hardware |
| Language | English |
Welcome message and advice on using audio equipment safely.
Guidance on safe listening levels to prevent hearing damage.
Steps to take when the unit does not operate properly.
Note regarding the serial number location for security.
Information on how unit settings are reset after power loss.
Instructions and notes for connecting the audio processor to other units.
Diagram for connecting to a head unit with front and rear inputs.
Diagram for connecting to a head unit without front/rear inputs.
Details on front/rear installation methods for the unit.
Describes front-mount installation using rubber bush or without.
Instructions for removing the main unit from the dashboard.
Method for securing the unit using side screw holes and bracket.
Instructions on how to reset the unit's microprocessor using the clear button.
Explains different display modes for the spectrum analyzer.
Automatic display mode activated when no audio signal is input for 20 seconds.
Instructions for setting volume, balance, and fader on the head unit.
Instructions for increasing or decreasing audio volume using buttons.
Explains how to adjust sound image positioning based on listener location.
Details on using the position selector for optimal sound staging.
Adjusting volume balance between front/rear and left/right speakers.
Resets fader and balance controls to initial conditions.
Choosing front, rear, or both speakers for equalizer effect.
Details on four preset EQ curves: ROCK, POPS, VOCAL, JAZZ.
How to select and apply preset equalizer curves (F1-F4).
Overall adjustment of equalizer curve effect.
Adjusting the level of each of the 15 frequency bands.
Saving user-adjusted equalizer curves into memory.
Procedure to save custom equalizer settings into user memory.
How to recall previously stored custom equalizer curves.
Resets the equalizer to a flat, neutral curve.
Programs reproducing studio, club, and live house sound field spaces.
Instructions for selecting and activating sound field programs.
Enables control of DSP functions via remote when unit is set to DSP.
Details on volume, DSP, and attenuator buttons on the remote.
Details on power source, grounding, dimensions, and weight.
Technical details of the 15-band graphic equalizer.
To Next Page
