To Next PageTo Next Page
Need help?Do you have a question about the Pioneer DMH-W4660NEX and is the answer not in the manual?
General| Screen Size | 6.8 inches |
|---|---|
| Resolution | 800 x 480 |
| Bluetooth | Yes |
| Preamp Outputs | 3 Pairs (Front, Rear, Subwoofer) |
| Peak Power Output | 50 watts x 4 channels |
| Built-in Amplifier | Yes |
| SiriusXM-Ready | Yes |
| HD Radio | Yes |
| Rear View Camera Input | Yes |
| DIN Size | Double DIN |
| WebLink | Yes |
| iDataLink Maestro | Yes |
| Apple CarPlay | Yes (Wireless and Wired) |
| Android Auto | Yes (Wireless and Wired) |
| RMS Power Output | 14 watts x 4 channels |
| Wireless Connectivity | Yes |
| Audio Features | 13-Band Graphic Equalizer, Time Alignment |
| Inputs | USB |
| Supported Media | MP3, WMA, AAC, WAV, FLAC |
| Navigation | No |
| Display Type | Capacitive Touchscreen |
| USB Ports | 2 (Rear) |
| USB Input | Yes (Rear) |
Essential safety warnings, FCC compliance, and operational guidelines.
Guidance on setting safe volume to prevent hearing damage and ensure clarity.
Crucial instructions for operating the vehicle safely while using the unit.
Identifies and explains the functions of the main unit's physical controls and display.
Guide for powering on the unit and completing initial setup procedures.
Guide to interacting with the device's touch screen for navigation and control.
Customizing the main screen with widgets, favorite sources, and applications.
Step-by-step guide to pair and connect Bluetooth-enabled devices.
Instructions for initiating phone calls using the hands-free system.
How to activate and use Siri for voice commands with iPhone connected.
Steps to connect and stream audio wirelessly from a Bluetooth device.
Guide to connecting the unit to a Wi-Fi network for internet access.
Steps to configure and initiate audio playback over a Wi-Fi connection.
Instructions on how to access and navigate websites using the unit's browser.
Steps to update the unit's firmware wirelessly using the CarAVAssist application.
Proper procedures for connecting and removing USB storage media to prevent damage.
Guide to establishing a connection with an iPhone via USB or Bluetooth.
Guide to operating iPhone applications and features via the vehicle's display.
Steps for connecting an iPhone for Apple CarPlay via USB or wirelessly using Bluetooth/Wi-Fi.
Information on compatible Android smartphones and requirements for Android Auto.
Guide to operating Android applications and features via the vehicle's display.
Steps for connecting an Android device for Android Auto via USB or wirelessly.
Steps required to authorize the unit for use with the Amazon Alexa voice assistant.
Using voice commands with Alexa to manage audio-visual features of the unit.
Guide for activating and setting up a SiriusXM satellite radio subscription.
Steps to connect an HDMI device and display its video output on the unit.
Connecting and configuring audio/video sources via the AUX input for playback.
Displaying video from cameras and configuring input settings for rear or secondary cameras.
Accessing vehicle information and OEM systems via the iDatalink adapter.
Process for flashing firmware and activating the iDatalink Maestro module.
Connecting to vehicle information and OEM systems using the Metra interface.
Navigating to the main settings menu to configure various device options.
Configuring rear view and secondary cameras, including input source selection.
Resetting all user settings and recorded content to factory defaults.
Steps to update the unit's firmware using a USB storage device for performance improvements.
Resetting all user settings and recorded content to their original factory default state.
Addressing common problems like black screens, Bluetooth errors, and AV connection issues.
Solutions for common connection failures, GPS signal loss, and time synchronization problems.
