Do you have a question about the Pioneer ELITE VSX-99 and is the answer not in the manual?
Amplification Type | Class D |
---|---|
Input Sensitivity | 200 mV |
HDMI Inputs | 8 |
4K Support | Yes |
3D Support | Yes |
THX Certified | Yes |
AirPlay | Yes |
Power Output per Channel | 140W (8 ohms, 20Hz-20kHz, 0.08% THD, 2 channels driven) |
Frequency Response | 5 Hz - 100 kHz |
Total Harmonic Distortion | 0.08% |
Signal-to-Noise Ratio | 100 dB |
Explains how to activate and cancel the demonstration mode.
Restores unit to initial settings for troubleshooting.
Resets unit to normal operating conditions due to external influences.
Covers instructions, water/moisture, location, heat, power, and cleaning.
Addresses power cords, polarization, grounding, and outdoor antennas.
Advises on placement, ventilation, and avoiding interference.
Provides examples for optimal surround speaker positioning.
Guides on orienting the AM loop antenna for best reception.
Recommends special antennas for better FM broadcast quality.
Details how to use S-VIDEO connectors for video signals.
Explains setup for dual center speaker configurations.
Explains the function of AC outlets and power cord safety precautions.
Explains how to store favorite radio stations for quick access.
Describes how to recall and listen to stored radio stations.
Guides on receiving stereo TV sound transmitted from FM radio stations.
Explains procedures for copying tapes between cassette decks.
Provides guidance on using the MR-100 system and potential issues.
Guides on using the remote to control other audio-visual components.
Explains tuner functions accessible via the remote control.
Describes the function of GUI-specific buttons on the remote and unit.
Explains GUI-based manual and automatic station tuning.
Details how to preset and recall stations using the GUI.
Explains how to configure speaker settings for optimal surround sound.
Explains how to select and assign manufacturer presets to the remote control.
Lists power output, input sensitivity, and frequency response for the amplifier.
Details specifications for FM and AM tuners, including sensitivity and distortion.
Details how Dolby Pro-Logic enhances audio for movies and music.